1 / 5

How to secure your Wi-Fi Camera

Wireless IP cameras require more setup and configuration than traditional wired camera systems. These cameras based on the plug and play methodology. But, making a connection is too important. These cameras donu2019t have running cables.u00a0<br>

argusfilch01
Download Presentation

How to secure your Wi-Fi Camera

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to set up Wireless IP camera to NVR

  2. Step 1: IP Camera Setup Procedure Firstly, thread your antenna onto the access point top which you are going to connect with your wireless IP camera. It’s time to connect a network cable with the access point and make sure that this connection must be protected from water. Now, make a connection of network cable by connecting it’s another end with the access point to the PoE for supplying the power. By making use of the LAN port of the power injector, it’s time to connect your wireless IP camera with your network cable. Now, plug the power cord of the PoE power injector into a 110V AC electric outlet.

  3. Step 2: It’s time to NVR Setup After IP camera setup now it’s time to connect the NVR with the camera. So, follow these steps- Make a connection of your network cable from the PoE side of the power injector to the access point that needs to be connected with NVR. Now, connect another end of your network cable with the PoE side of your access point's power injector. Now making use of a network cable, connect the access point’s LAN side of PoE injector with the NVR. It’s time to connect the power cord of access point with a 110V AC electric outlet. Now, supply the power to the NVR by con

  4. Step 3: It’s time for Viewing Wireless IP Camera through NVR It’s time to check the data transmission is working properly or not. Now, connect your monitor as well as your mouse with your NVR. If you have done properly, you will not face any obstructions while data transmission. Now, you can view your location by connecting your camera with NVR. By connecting your camera with NVR, you will be able to monitor your sites in the absence of an internet connection. So, make use of these steps while connecting your camera to NVR. These steps will help you a lot.

  5. Contact Us: • Company:- Amcrest • Address: Houston, TX USA, 77001  • Phone: 888-212-7538

More Related