300 likes | 533 Views
SAFE AREA USE RANGE. TRANSMITTERS 300. SAFE AREA USE RANGE: TRANSMITTERS 300. CTX/OX 300 CSC 300 CTX 300 « parking ». CTX 300 : MAJOR CHARACTERISTICS. Housing resistant to aggressive environments Protected against splashing Precalibrated interchangeable bloc/cell
E N D
SAFE AREA USE RANGE TRANSMITTERS300
SAFE AREA USE RANGE:TRANSMITTERS300 • CTX/OX 300 • CSC 300 • CTX 300 « parking »
CTX 300: MAJOR CHARACTERISTICS • Housing resistant to aggressive environments • Protected against splashing • Precalibrated interchangeable bloc/cell • 2 or 3 active wires (signal 4/20 mA) • IP 66
CTX 300: TOXIC GAS • Detection:main toxic gas • electrochemical Cells • Plug-in precalibrated cell • Options:with or without display and LED
COX 300: OXYGENE • Oxygene detection, • Electrochemical cells • Plug-in precalibrated cell • Options: idem TOX
CSC 300: semi-conductor • Gas detected:combustibles,solvants and main fréons • semi-conductor cell(different types) • Plug-in precalibrated cell • 3 activ wires
CTX 300: CO PARKING • CO Detection in car-park • electrochemical CO Cell • Plug-in cell • Fitted with 2 cable glands (maximum 5 transmitters in loop).
INDUSTRIAL TRANSMITTERS • OLCT 10 • OLCT 20 • OLCT 50 • OLCT 60
Sizes : ATEX and low cost: OLCT10 • ABS housing ….. idem OLC10 • Approved ATEX 3G • Synergy with MX15
ATEX and low cost: OLCT10 • Transmitters for flammable or toxic gases • 2 or 3 active wires(signal 4/20 mA), according to the type of cell (type of gas) • Possibility of network ( 5 transmitters maximum) for toxic gas detection : NO/NO2/CO.
Example with a transmitter OLCT 10 for explosivegases (32 ohms in loop): Connect correctly the 3 wires following indications on terminals(1/2/3) 1 2 3 1 2 3 OLCT10 /control unit
PPS3 OLCT10« explo version »: over-scale • - the transmitter manages a function « nonambiguity indication » if the concentration of gaz is too high (>100% LEL: the signal will be bloqued on 23,2 mA, • It can be acknowledged either manually (power or maintenance switch) or automatically (solder spots PPS3).
Unit MX15 1 3 1 3 Connect correctly the 2 wires following indications on terminals(1/3) OLCT10 toxic version/control unit Example with once transmitter OLCT 10 for toxicgases (128 ohms in loop):
Example of 2 OLCT10 linked in parallel to the control unit MX15 : MX15 1 2 3 1 3 3 1 3 1 3 1 3 1 3 1 3 1 IN OUT IN OLCT10 TOX /control unit • Special application:the same gas in a same zone • possibility of network :up to 5 OLCT10 in parallel CO CO
OLCT10 TOX /control unit • Example of 2 networks of toxic OLCT10 (5 transmitters maximum per loop : 2 different toxic gases in the same zone or the same gas in two closed zones • Networks linked to a dual channel control unit
Plug-in precalibrated cell THE COMMON PART
Plug-in precalibrated cells • Flameproof:for gasLEL, CO, H2S, NO, NO2 , SO2, H2, • NH3 , ETO, O2 • IS: for gas • CO, H2S, NO, NO2 , SO2, H2, • NH3 (tox), HCl, HCN, Cl2, O3, COCl2, ASH3, • ClO2, ETO, SiH4, O2, [ HF,OLCT60],…
OLCT 20 15m OLCT 20 D[D (distant) ] Lg.= OLCT 20 + = Fixation : ThreadingM25 ou ¾ NPT(local casing) 40cm Remote detector: fitted with a cable-gland
Precalibrated interchangeable bloc of cell Transmitter OLCT 20 : structure IS or flame proof:different bodies Interface pcb(included). -output: 4 / 20 mA 3 ou 2 wires Interface/adaptator pcb:according to the different types of cells. -Voltage output
TRANSMITTEROLCT 20 (D):characteristics in short • Approval:dori • Transmitter LEL ( flam. ) ... • Transmitter TOX. Flame proof • Transmitter TOX. IS • 4..20 mA, 2 ou 3 wires • Fixation: bracket if remote • Remote :within a restricted area or bad accessibility.
Cell-block precalibration system (suitcase) 0 FLOWMETER FLAT CABLE S 12VDC CONNECTOR CALIBRATION GAS DISPLAY CHARGER
TRANSMITTER OLCT 50 casing approved: d Bloc of cell = OLCT20
TRANSMITTER OLCT 50 A • LOW COST VERSION • CASING APPROVED « d » • bloc of cell « OLCT20 », « d » version only • 4-20mA electronics included in casing
Transmitter OLCT 50 D D (remote) OLCT 20 D
OLCT 50: in short • Flame-proof casing/ epoxy paint • 2 or 3 active wires • 4/20 mA signal • LEL and toxic gases • Precalibrated interchangeable bloc/cell • Approval : d or i • IP 66
TRANSMITTER OLCT 60 Approval housing: d LCD: 4 digits Transmitter included If « IS » version:zener barrier will be included.
TRANSMITTER OLCT 60 D D: remote remote sensor version (OLCT20D)
TRANSMITTER OLCT 60 • Flame-proof casing/ epoxy paint • Specific toxic gases « IS » version • Precalibrated interchangeable sensor-block • 4..20 mA , 3 wires obligatory • Approvals « d » or « i » • Maintenance mode by magnetic switch • Option : (D) remote.