1 / 12

How I Do Setup My Arlo Wireless Camera System On IOS Devices?

Arlo Wireless Camera Setup Provides Purely Wireless Cameras To Secure Home and Office etc. Its wide plan arrangement of Wi-Fi reconnaissance cameras have a wide once-over of features and can be mounted wherever. In the Arlo camera, various features like IP65 Certified Weather-resistant, Motion Alert, Night Vision, etc.<br>To Know More Visit Here - https://arlosetup-camera.com/

arlocamerasetup
Download Presentation

How I Do Setup My Arlo Wireless Camera System On IOS Devices?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Arlo Camera Setup The Arlo camera setup is a wireless smart home security system, backed up with good battery life. Arlo cameras are easy to use and are installed within 10-15 minutes of your time. They can be used indoors as well as outdoors.

  2. How To Sync And Setup Arlo Wireless Camera?

  3. Step 1 - Unlock the battery compartment by sliding and holding the latch.

  4. Step 2 - Slide the battery door back and lift it to open the compartment.

  5. Step 3 - Insert the batteries as shown and close the battery door.

  6. Step 4 - Bring the camera within one to three feet (30 to 100 centimeters) of the base station.

  7. Step 5 - Sync the camera to the base station: & Wait for the sync status LED to blink green. If you are using an Arlo base station, press the Sync button on the side or on the back of the base station for about two seconds and then release the button. If you are using an Arlo Pro base station, press the button on the top of the base station for about two seconds and then release the button.

  8. Step 6 - Wait for the sync status LED to blink green.

  9. Step 7 - Press the Sync button on top of the camera for about two seconds and then release the button.

  10. Step 8 - Check the camera LED on the base station. If the camera LED on the base station turns solid green, the sync process is complete.

  11. Step 9 - Repeat these steps for each camera. Note: If you do not complete the sync process within 60 seconds, press the Sync button on the base station and try again.

  12. Contact Us Website - https://arlosetup-camera.com/ Phone Us - +1-888-630-4674

More Related