1 / 1

BROACHING

BROACHING. Purpose: cut keyway in a gear or related component. Location: Cabinet #4 (Haas Mill Cabinet) . Safety: Beware of s harp edges. Tools: Broach Bushing Shims . Broach. Guide. Steps : 1. Ream hole to size specified on bushing

ashby
Download Presentation

BROACHING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BROACHING Purpose: cut keyway in a gear or related component Location: Cabinet #4 (Haas Mill Cabinet) Safety: Beware of sharp edges Tools: Broach Bushing Shims Broach Guide Steps : 1. Ream hole to size specified on bushing 2. Slip bushing into hole where keyway is desired 3. Insert appropriate broach into bushing guide, flat side of teeth facing down, and lightly oil teeth 4. Set up under press to push the broach through bushing 5. Test keyway and add shims if necessary Setup on Press: Add a shim to deepen keyway Make sure broach is vertical in all directions before pressing through

More Related