1 / 1

TEM SAMPLE PREPARATION GUIDE

TEM SAMPLE PREPARATION GUIDE. . *. *. + ultrasonic acetone rinse. + ultrasonic acetone rinse. . RD. . Reference marking. Deakin University Electron Microscopy Facility. Disc saw [Struers Acutom-5]. Dimple grinder [Gatan 656]. Bulk >> ~0.5mm. Diamond wire saw [BAL-TEC WSH 020].

astro
Download Presentation

TEM SAMPLE PREPARATION GUIDE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TEM SAMPLE PREPARATION GUIDE  * * + ultrasonic acetone rinse + ultrasonic acetone rinse  RD  Reference marking Deakin University Electron Microscopy Facility Disc saw [Struers Acutom-5] Dimple grinder [Gatan 656] Bulk >> ~0.5mm Diamond wire saw [BAL-TEC WSH 020] 50-100 m >> Break-through Electrolytic jet polisher [Tenupol5] Yet to be purchased Grinding wheel [Struers Laboforce/Labopol ] 0.5mm >> ~120m * Start with automatic. Finish with manual abrasion   Ion miller [Gatan 691 PIPs] * Attach to a suitable substrate prior to thinning. 3mm Ø disc Disc punch [Gatan 659 ] Ductile/soft materials EtOH rinse & dry [analytical grade] Sample cleaning >> TEM Ultrasonic Cutter [Gatan 601 ] Brittle/hard materials MARKER * Use orientation markers where required. Ultramicrotome [Leica UC6] ~120m>> 50-100 m Disk Grinder [Gatan 623 ] Bulk >>TEM * Manual abrasion 1200 grit paper.

More Related