1 / 11

Lecture 4 Operational Amplifiers—Non-ideal behavior

Lecture 4 Operational Amplifiers—Non-ideal behavior. 1. Goals. Study non-ideal op amp behavior. Demonstrate circuit analysis techniques for non-ideal op amps. Understand frequency response limitations of op amp circuits. 2. Frequency Response of Op Amps: General Case.

atalo
Download Presentation

Lecture 4 Operational Amplifiers—Non-ideal behavior

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 4Operational Amplifiers—Non-ideal behavior 1

  2. Goals • Study non-ideal op amp behavior. • Demonstrate circuit analysis techniques for non-ideal op amps. • Understand frequency response limitations of op amp circuits. 2

  3. Frequency Response of Op Amps: General Case vo = A (v+ - v-) (A) is function of frequency General purpose op-amp has a single-pole response 100db Gain = 105 0 dB Gain = 1 3 Band-width Unity gain frequency

  4. Frequency Response of Op Amps: General Case Op amps: Low-pass amplifier with high gain at dc and a single-pole frequency response. wB= open loop bandwidth of op amp. ωT= unity gain bandwidth (frequency at which magnitude of gain is unity). At w >>wB, At ω =ωT, At w >>wB,product of magnitude of amplifier gain and frequency is a constant value of unity gain frequency. Hence, wT is also called gain-bandwidth product. 4

  5. Frequency Response of Op Amps: General Case (Example) Frequency values are often expressed in Hz. • Problem: Find transfer function describing frequency-dependent amplifier voltage gain. 5

  6. Frequency Response of Op Amps: Noninverting Amplifier 6

  7. Frequency Response of Op Amps: Noninverting Amplifier |Vo/Vin| (dB) Ao -20 dB/dec 1 + R2/R1 f (log scale) f3dB (no feedback) f3dB (with feedback) 7

  8. For a 741 Op amp, ft = 1MHz Gain = 105 (100dB)  f3dB = 1MHz/105 = 10 Hz Gain = 100 (40 dB)  f3dB = 1MHz/100 = 10KHz Gain = 10 (20dB)  f3dB = 1MHz/10 = 100KHz 8

  9. Frequency Response of Op Amps: Noninverting Amplifier (Example) Problem: Characterize frequency response of noninverting amplifier. Given data:Ao= 105= 100 dB, fT= 107 Hz, desired Av= 1000= 60 dB Assumptions: Amplifier is described by single-pole transfer function. Analysis: Noninverting amplifier transfer function 9

  10. Slew Rate (SR) Slew rate: maximum rate of change at the output of the OPAMP 10

  11. Large Signal Limitations: Slew Rate (SR) and Full-Power Bandwidth • Slew rate: Maximum rate of change of voltage at output of op amp.Typical values range from 0.1V/ms to 10V/ms. • For given frequency, slew rate limits maximum signal amplitude that can be amplified without distortion. For no signal distortion, Full-power bandwidth is highest frequency at which a full-scale signal can be developed. 11

More Related