1 / 18

Electric Motor Bearing Lubrication

Something about electric motor bearing lubrication.

aungkhainghtun
Download Presentation

Electric Motor Bearing Lubrication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ELECTRIC MOTOR BEARING LUBRICATION BY: AUNG KHAING HTUN LUBE ENGINEER

  2. AIM • To understand how the proper lubrication of electric motor bearing is essential. • To know how to choose right electric motor grease • To know the correct procedure greasing the motor bearing

  3. Guide to electric motor bearing lubrication • Grease Lubrication • Choosing right electric motor grease • Adding grease to electric motor bearings

  4. Grease Lubrication • reduce friction and wear • protect bearings against corrosion • act as a seal to prevent entry of contaminants POLYUREA Mobil Polyrex EM Mobilith SHC 100

  5. Choosing right electric motor grease • Viscosity • Consistency • Oxidation resistance • Anti-wear • Dropping point • Shear stability

  6. Adding grease to electric motor bearings • Right time • Right amount • Right way

  7. Right time • Speed • Temperature For each 10°C above 65°C Interval Should be Reduced by Half • Size Motor Size Grease Interval Up to 75 HP Yearly75 to 250 HP 6 Months Above 250 HP 2 Months

  8. Right time

  9. Right Amount • Only the grease in the bearing should be replaced: G = .114 x D x B G = Grease ounces • D = OD inches • B = Width inches Translate to gun strokes by calibrating gun for strokes/ounce

  10. Right Amount- Grease Gun Calibration Check -

  11. Right Amount

  12. Right Amount

  13. Right Way • Remove drain plug, clean old grease from drain opening • Clean pressure fitting, grease gun nozzle • Pump specified amount of grease into fitting • Run machine until rotating parts expel excess, temperature normalizes (± 10 minutes) • Replace drain plug

  14. Right Way Industrial Best Practice

  15. Right Way Industrial Best Practice

  16. TIPs

  17. THANKS FOR YOUR ATTENTION

More Related