1 / 21

MegaGen Implant System

MegaGen Implant System. Specification Surface Treatment – RBM(Resorbable Blast Media). Female screw. Hex Dia. Platform Dia. Hex Height. Feature - The most famous external fixture design. - Bevel shape in platform part especially 4.5 and 5.5 diameter of fixtures. Body length.

aurelia-allison
Download Presentation

MegaGen Implant System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MegaGen Implant System

  2. Specification Surface Treatment – RBM(Resorbable Blast Media) Female screw Hex Dia. Platform Dia. Hex Height Feature - The most famous external fixture design. - Bevel shape in platform part especially 4.5 and 5.5 diameter of fixtures. Body length Thread Dia. Ø3.3 Ø3.75 Ø4.5 Ø5.0 Ø5.5 Ø4.0 Implant Development Dept.

  3. D1 : Hard Bone / D2,D3 : Normal Bone / D4 : Soft Bone ⑥ ② ③ ④ ⑦ ① ⑤ • Lance Drill • 2.0 Twist Drill • 2.8-3.3 Pilot Drill • 2.8 Straight Drill • 3.3 Countersink Drill • 3.3 Tap Drill Soft Bone : 1 – 2 – 3 – 7 Normal Bone : 1 – 2 – 3 – 4 – 5 – 7 Hard Bone : 1 – 2 – 3 – 4 – 5 – 6 - 7 Implant Development Dept.

  4. D1 : Hard Bone / D2,D3 : Normal Bone / D4 : Soft Bone ⑦ ② ③ ④ ① ⑤ ⑥ ⑧ • Lance Drill • 2.0 Twist Drill • 2.8-3.3 Pilot Drill • 2.8 Straight Drill • 3.0 Straight Drill • 4.0 Countersink Drill • 3.75 Tap Drill Soft Bone : 1 – 2 – 3 – 4 – 8 Normal Bone : 1 – 2 – 3 – 4 – 5 – 6 – 8 Hard Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 - 8 Implant Development Dept.

  5. D1 : Hard Bone / D2,D3 : Normal Bone / D4 : Soft Bone ③ ④ ⑥ ⑦ ⑧ ① ② ⑤ • Lance Drill • 2.0 Twist Drill • 2.8-3.3 Pilot Drill • 2.8 Straight Drill • 3.3 Straight Drill • 4.0 Countersink Drill • 4.0 Tap Drill Soft Bone : 1 – 2 – 3 – 4 – 8 Normal Bone : 1 – 2 – 3 – 4 – 5 – 6 - 8 Hard Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 Implant Development Dept.

  6. D1 : Hard Bone / D2,D3 : Normal Bone / D4 : Soft Bone ④ ① ③ ⑥ ⑨ ② ⑦ ⑤ ⑧ • Lance Drill • 2.0 Twist Drill • 2.8-3.3 Pilot Drill • 2.8 Straight Drill • 3.3 Straight Drill • 3.8-4.3 Pilot Drill • 3.8 Straight Drill • 4.5 Tap Drill Soft Bone : 1 – 2 – 3 – 4 – 5 - 9 Normal Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 - 9 Hard Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 - 9 Implant Development Dept.

  7. D1 : Hard Bone / D2,D3 : Normal Bone / D4 : Soft Bone ⑨ ① ③ ④ ⑦ ⑩ ② ⑧ ⑤ ⑥ • Lance Drill • 2.0 Twist Drill • 2.8-3.3 Pilot Drill • 2.8 Straight Drill • 3.3 Straight Drill • 3.8-4.3 Pilot Drill • 3.8 Straight Drill • 4.3 Straight Drill • 5.0 Tap Drill Soft Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 – 10 Normal Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 - 10 Hard Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 – 9 - 10 Implant Development Dept.

  8. D1 : Hard Bone / D2,D3 : Normal Bone / D4 : Soft Bone ⑨ ⑦ ① ② ③ ④ ⑧ ⑪ ⑤ ⑥ ⑩ • Lancce Drill • 2.0 Twist Drill • 2.8-3.3 Pilot Drill • 2.8 Straight Drill • 3.3 Straight Drill • 3.8-4.3 Pilot Drill • 3.8 Straight Drill • 4.3 Straight Drill • 4.8Straight Drill • 5.5 Tap Drill Soft Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 – 11 Normal Bone : 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 – 9 - 11 Hard Bone : 1 –2 – 3 – 4 – 5 – 6 – 7 – 8 – 9 – 10 -11 Implant Development Dept.

  9. Purpose Fixture Mount - To give accurate torque force during insertion Mount Screw - To connect mount and fixture Feature - Color coding to distinguish the diameter Length 사양(Specification) Small Regular Wide Implant Development Dept.

  10. Purpose Cover Screw - To protect platform and inner screw hole until 2nd surgery Feature - Color coding to distinguish the diameter Interface Dia. Specification Small Regular Wide Implant Development Dept.

  11. Purpose Healing Abutment - To heal gingival and make cuff well 453 Profile Dia. Feature Height Interface Dia. Specification Small Regular Wide Implant Development Dept.

  12. Purpose Impression Coping – Transfer Type - To take impression and make mater model - Closed try method Non-Hex Profile Dia. Length Feature - 2 guide pins are included in the hex type so that it can be used with open tray method Interface Dia. Hex Specification Implant Development Dept.

  13. Purpose Impression Coping – Pick Up Type - To take impression and make mater model - Closed try method Profile Dia. Length Feature - 3mm cuff contact area to avoid gingiva interference Specification Interface Dia. Implant Development Dept.

  14. Purpose Lab Analog - Replica of fixture in the master model Female Screw Hex Dia. Platform Dia. Feature Hex Height Specification Implant Development Dept.

  15. Purpose Temporary Abutment - for making provisional restoration (Temporary teeth) Feature - Diamond shape of surface makes resin easily attached Height Specification Profile Dia. 1.3 Interface Dia. Implant Development Dept.

  16. Purpose EZ Post - for making cemented & screw combination type of prosthetic Feature - It has advantage of Cement post type and Screw type Abutment - Able to adjust path in case of inaccurate path by milling work Post Height Profile Dia. Specification Cuff Height Interface Dia. Implant Development Dept.

  17. Purpose Angle Abutment - for making cemented and combination type of final abutment in case of need to adjust path of prosthetic Angle Feature - It has two type of degree 15° and 25° - Same shape of margin area as EZ Post Post Height Profile Dia. Specification Cuff Height Interface Dia. Implant Development Dept.

  18. Purpose Milling Abutment - For making cemented and combination type of final abutment for final prosthetic Post Height Feature - In case of need to customize margin area or to adjust path and height - able to adjust the height of abutment by the grooves on the top Profile Dia. 사양(Specification) Cuff Height Interface Dia. Implant Development Dept.

  19. Purpose UCLA Gold Abutment - For making screw type of final abutment for final prosthetic Feature - Able to make final prosthetic with dental precious alloy by casting method - Using in case of lack of esthetic, path, space - Gold Melting Point: 1491.5℃ - Plastic Sleeve melting point:over 333 ℃ Height Profile Dia. Specification 1.2 Interface Dia. Implant Development Dept.

  20. Purpose Plastic Abutment - For making screw type of final abutment for final prosthetic Feature - Able to make final prosthetic with dental non-precious alloy by casting method - Using in case of lack of esthetic, path, space Height Profile Dia. Specification 1.2 Interface Dia. Implant Development Dept.

  21. Purpose Regular Abutment - Same as conical abutment Profile Dia. Feature Cuff Height 1.0 Specification Interface Dia. Implant Development Dept.

More Related