310 likes | 485 Views
OfficeServ 7030. Description. 2008. 03. Samsung Electronics Co., Ltd. Contents. Overview. System Outward. Install. Configuration. Function. Overview. Target Segment. ■ Main Target - Small Biz. 1 to 20 extensions - Replacing DCS 408, 816 market with IP enabled platform.
E N D
OfficeServ 7030 Description 2008. 03 Samsung Electronics Co., Ltd.
Contents Overview System Outward Install Configuration Function
Overview Target Segment ■ Main Target - Small Biz. 1 to 20 extensions - Replacing DCS 408, 816 market with IP enabled platform Platform ■ IP Enabled platform for under Max. 20 extensions - Basic embedded Config : 2SLI, 4MGI, 1LAN, MISC - Trunk b’d : 4TRK, 2BRI - Station b’d : 4SLI, 2DLI, 4DLI, 4LAN - Option b’d : Modem / EXP Compatibility and Scalability ■ Identical S/W and Terminals to 7000 series ■ SPNet connectivity with OfficeServ 7100/7200/7400 ■ IP Phone, WiFi phone and SIP Trunk Connectivity ■ Expansion up to 2 Cabinet
Max capacity Max. 820 pure IP configuration by 1 cabinet [ 1 Cabinet ] [ 2 Cabinets ]
Card Types • Station Cards • 2DM/4DM : 2/4 ch DLI • 4SM : 4 ch SLI • 4LM : 4 ch Switch (Unmanaged LAN Switch) • Trunk Cards • 4TM : 4 ch Loop Trunk • 2BM : 2 ports BRI trunk • Others • EPM : Install for 4LM or Master/Slave Mode • MODEM : Same board with OfficeServ 7000s Card Compatibility D-Board of OfficeServ 7100 can Not be installed in OfficeServ 7030.
Power Modem <Slot 4> 4TM/2BM <Slot 3> 2,4DM/ 4SM/4LM <Slot 2> 2,4DM/ 4SM/4LM EPM D-Board Install Installing EPM Has to be installed for 4LM D-Board. Has to be installed for Extended Mode.
On Off 1 2 EPM DIP Switch RJ45 Connector DIP Switch in EPM Switch 1 : On(Master), Off(Slave) Switch 2 : On(Stand Alone), Off(Extended)
Port Configuration <Slot 2> 2,4DM/ 4SM/4LM <Slot 4> 4TM/2BM EPM <Slot 3> 2,4DM/ 4SM/4LM ⊙ Reset <Slot 1> Base 2SLI LAN MISC
Port Install – Stand Alone Mode <Slot 4> TM:Loop Trunk BM:BRI Trunk <Slot 2> DM:Digital Phone SM:Single Line Phone LM:IP Phone Don’t connect <Slot 3> DM:Digital Phone SM:Single Line Phone LM:IP Phone ⊙ LAN MISC <Slot 1> Single Line Phone : Connect : Don’t connect Installing 4LM EPM has to be installed but has NOT to be connected through EPM ports.
Port Install – Extended Mode Slave ⊙ Don’t Connect Connect directly With packed cable Master ⊙ LAN : Connect : Don’t connect LAN Port in Slave Rack Has NOT to be connected through LAN port in slave rack.
Default LAN Setting • IP Address : 10.0.2.10 • Slave IP Address : 10.0.2.12 • Gateway : 10.0.2.1 • Subnet Mask : 255.255.255.0 Slave IP Address In extended mode, “Slave IP Address” has to be programmed in MMC830 of master system.
Default DB Conf. – Stand Alone : Real Slot : Virtual Slot STN : 2,4DM/ 4SM/ 4LM (If not installed, the slot is installed with ITP) TRK : 4TM/ 2BM ITP : Can be changed to WIP or SIP in MMC 857 IDs of ITP/WIP/SIP : ‘3’ + Tel Number (Not start with 3201)
Default DB Conf. – Extended : Real Slot : Virtual Slot STN : 2,4DM/ 4SM/ 4LM (If not installed, the slot is installed with ITP) TRK : 4TM/ 2BM ITP : Can be changed to WIP or SIP in MMC 857 IDs of ITP/WIP/SIP : ‘3’ + Tel Number (Not start with 3201)
Default Tel Number – Stand Alone • DGP/SLT/IPP/WIP/SIP : 201 ~ 220 (max 20ch) • Loop/BRI Trunk : 701 ~ 704 (max 4ch) • Virtual SLI/DLI : 331 ~ 346 (max 16ch) • SPNet/SIP Trunk : 831 ~ 846 (max 16ch) • VMAA : 301 ~ 302 (max 2ch) • MGI : 381 ~ 384 (max 4ch) • Station Group : 500 ~ 509 (10 ports) • Trunk Group : 9, 800 ~ 803 (5 ports) • MOH/PAGE/Dry Contact : 371, 361 ~ 363 • MODEM : 399 Phone ID IDs of IPP/ WIP/ SIP : ‘3’ + Tel Number
Default Tel Number – Extended • DGP/SLT/IPP/WIP/SIP : 201 ~ 220 (max 20ch) • Loop/BRI Trunk : 701 ~ 708 (max 8ch) • Virtual SLI/DLI : 331 ~ 346 (max 16ch) • SPNet/SIP Trunk : 831 ~ 846 (max 16ch) • VMAA : 301 ~ 304 (max 4ch) • MGI : 381 ~ 388 (max 8ch) • Station Group : 500 ~ 509 (10 ports) • Trunk Group : 9, 800 ~ 803 (5 ports) • MOH/PAGE/Dry Contact : 371~372, 361 ~ 366 • MODEM : 399 Phone ID IDs of IPP/ WIP/ SIP : ‘3’ + Tel Number
Function – Drivers MGI/VM License Have to input license key in MMC841 like as OfficeServ 7100.
Function – Management Installation Tool Can connect to OS7030 system with higher than V1.2.0 Web Management URL https://[System IP Address] ID/Password : admin/samsung
Function – Package Upload Can upload S/W Package with web management.
Function – DB Backup Can import/export DB file with web management.
Function – Quick Install Can install with quick menu. To be added the screen capture.
Function – Add a port Can add a station or trunk port. To be added the screen capture.