6 Strategies Experienced Towmen Know and Practice

1. 6 Strategies Experienced Towmen Know and Practice Anyone who thinks car hauling and towing is easy work has never done it for a living. Working as a tow operator is one of the most dangerous jobs in America thanks to the combination of weather, other drivers, and the generally hazardous nature of trying to recover vehicles that may not necessarily be in the safest locations. The best tow operators, also known as towmen in the industry, know that they are only as safe as the equipment and strategies they employ on the job. Here at Mytee Products, we have the tools tow operators need. From auto hauling straps to chains and winches, we can properly equip any truck for just about any job. What we cannot to do is equip operators with the knowledge they need to do their jobs safely. That knowledge comes from seasoned operators who teach their younger counterparts on the job. For example, your average veteran will know all about the following six strategies for safe vehicle recovery: 1. Position the Truck as Close and Straight as Possible Whether a towman is using a flatbed wrecker or traditional tow truck, it is a good idea to position the truck as close to the vehicle as possible. The less pulling over open space required, the safer things are for both the tow operator and the vehicle being recovered. Along those same lines, getting the truck perpendicular to the vehicle is ideal. A perpendicular position reduces stress on winches and cables. 2. Use a Spotter When Possible Your average towman works alone except on especially complicated recoveries. It is up to him or her to properly load the vehicle, strap it down, and get back on the road safely. Having said that, experienced operators know it is always wise to use a spotter when one is available. A spotter keeps an eye on the recovered vehicle as it’s being loaded onto the back of the wrecker or hoisted by the hook. Obviously, the spotter should be an experienced operator is well.

2. 3. Use Properly Rated Straps and Chains The next tip is a matter of both law and safety. According to federal and state laws, tow operators must use properly rated straps and chains to secure vehicles to tow trucks. That means operators have to know a little bit of math to do what they do. The general rule is to use straps rated at 2 to 3 times the weight of the vehicle being recovered. The stronger the straps, the more secure the vehicle will be when accelerating and braking. 4. Make Use of the Factory Tow Hook When loading a recovered vehicle onto the back of the wrecker, the experienced operator will make use of the factory tow hook for both winching and tying down. The tow hook is the strongest point on a car for these sorts of operations. Not using it is ignoring something designers put in place specifically for recovery operations. 5. Utilize Four Points of Contact Wrecker operators should always utilize four points of contact at a bare minimum. Chains and straps should be deployed at 45° angles in order to reduce both parallel and perpendicular movement. Four points of contact will keep the recovered vehicle in place better than three, and a lot better than two. It takes time to learn all the tricks of the towman’s trade. We cannot offer you either the time or the on-the-job training you need to be the best in your industry, but we do have a full selection of towing supplies and tools to keep your truck fully equipped.