1 / 66

An IEM Outreach Programme to G&S Members The Code of Ethics (or the Code of Professional Conduct) ~ The Hallmark of

An IEM Outreach Programme to G&S Members The Code of Ethics (or the Code of Professional Conduct) ~ The Hallmark of Professionalism; Engineering in Malaysia.

aviv
Download Presentation

An IEM Outreach Programme to G&S Members The Code of Ethics (or the Code of Professional Conduct) ~ The Hallmark of

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. An IEM Outreach Programme to G&S MembersThe Code of Ethics (or the Code of Professional Conduct)~ The Hallmark of Professionalism;Engineering in Malaysia By Engr. Rocky H.T. Wong, PEng, FIEM; Hon FAFEO-ASEAN Engr, Founding Fellow (AAET), Hon. Fellow (TEEAM); Chairman – IEM pro ETI Bureau, Past Chairman – ACEM, Past President - FACE, The Head Commissioner – ASEAN Engineers Register (AER) Commission. RWHT/IEMQ&A/COPC/REV(1)120908

  2. During the period before independence and immediately thereafter, membership of learned societies for engineers (including “pupil engineers”), with the ICE, IMechE, IEE, and the IEM (after 1959) was the Hallmark of Professionalism.

  3. Most Malayan engineers then were in the employ of PWD (JKR), CEB/NEB (TNB), MR (KTM), DID (JBS), Telecoms (TM), MU (UM) etc. • A larger part of the early membership in the IEM came from amongst the rank of “engineers working for the government”. • The earlier Past Presidents of the IEM were usually the “Heads” of those Government Departments and agencies.

  4. To be promoted in “government service” an engineer must prove that he is a “Professional Engineer” - meaning, he is a “M.I.E.M”~ a gold standard hallmark of professionalism; much respected by peers and allure respect by others.

  5. On the other hand, in the private sector, an engineer with IEM corporate membership such as; MIEM or FIEM meant that he had the “license to practise” consulting engineering in the field of his engineering discipline.

  6. A competitive consulting engineer would endeavour to attain corporate fellowship in the IEM and additionally, in a UK based engineering “learned society” of his discipline e.g. ICE or IMech or IEE, etc. and would have earned him the “CEng“ status.

  7. However, membership in the IEM (before the existence of BEM) entitled the engineer to pre-fix his name the appellation: “Ir.” – a qualified practitioner of engineering; equivalent to the status of C.Eng.

  8. The CodeofPractice

  9. To qualify for membership in the IEM meant and continue to mean, that a person conforms to a “Code of Practice” defined by what follows:-

  10. The Engineers’ Code of Practice of five (5) components.

  11. 1. Accreditation Procedure; an engineering education programme and IHL audit process of qualifications for the purpose of membership entry consideration.

  12. Code of Ethics (or Code of Professional Conduct); • Professional Interview (PI); for the purpose of admission into Corporate Membership by way of peer-based assessment which includes the following:-

  13. Actual face-to-face interview • Part A; Written Exam on training and experience gained during the prescribed pupilage or PDP period • Part B; another written exam on the proper order of action required of a professional engineer, in situations that may result in a conflict between an Engineer’s self interest and his duty to others i.e. his COE.

  14. Life long learning to keep obsolescence at bay (now known as CPD) as per the objectives of the IEM, i.e “…….. to promote and advance the science and profession of all aspects of engineering”.

  15. Public Interest driven science, engineering & technology (SET) centric design codes and standards, addressing the essential requirements of: safety, health and the welfare of the community and the environment overall.

  16. The Registration of Engineers Act, 1967 - the REA ’67

  17. The Registration of Engineers Act was passed by Parliament in 1967 but was only implemented on 23 August 1972 when the Board of Engineers, Malaysia (BEM) was operationalised.

  18. BEM registers ALL:- • Professional Engineers, • Graduate Engineers, and • Foreign (Temporary) Engineers.

  19. The REA ’67 over 41 years, has been amended 6 times: • The first two minor amendments of 1972 (Act A132) and 1973 (Act A173) for orperationalising the BEM; • Amendments in 1974 (Act 218) gave rise to the much talked about Clause 7A – “Body Corporate” which may practise as consulting engineers – hitherto was only restricted to the natural persons. And the power of the President of the BEM was further boosted!

  20. Amendments in 1987 (Act A662) introduced the “temporary registration as a Professional Engineer of any foreign engineer” and making the Act explicit in the restriction on employment of unregistered person as an Engineer: “No person shall employ as an Engineer any person who is not registered under this Act”.

  21. Amendments in 2002 (Act A1158) introduced the term “Engineering Consultancy Practice (ECP)” under the amended Clause 7A; “…. a sole proprietorship, partnership or body corporate may practise as an Engineering Consultancy Practice and recover in any court any fee; remuneration or other form of consideration for any professional engineering services rendered……..”.

  22. New clause 7B permits a body corporate ECP in providing combined engineering and architectural consultancy services, together with quantity surveying services. It deals with details concerning the Board of Directors, and permitted percentages of equity by the various parties.

  23. Act A1158 created the perception that there are two categories of P.Eng’s, viz the original category P.Eng having the inherent “right to practise” and the newly defined ECP P.Eng. A new Clause 10B deals with the registration of Accredited Checkers who have proven “……practical experiences in the design and construction of buildings as defined in the Streets, Drainage and Building Act 1974 (Act 133)”.

  24. The latest amendments passed as Act A1288 early last year (i.e 2007) aligns the REA with the introduction of the C.C.C. policy (implemented on 12 April 2007). The issuance of the Certificate of Completion and Compliance was launched by the PM on 13 April 2007. The C.C.C. replaces the Certificate of Fitness for Occupation (CFO) previously issued by Local Authorities.

  25. A new Part IIIA on “Disciplinary Committee” has been introduced. The intention of this is to provide the necessary confidence among the public that when ECP P.Eng’s as submitting persons signed off the CCC – they do so professionally, after due care and diligence.

  26. The BEM is the domestic Regulator of the practice of engineering in Malaysia. In the context of the ASEAN MRA on Engineering Services, the BEM is Malaysia’s designated Professional Regulatory Authority i.e. PRA for Engineering Services.

  27. An Engineer can only be a “Registered Engineer” with the BEM and NOT call oneself a “member” of the BEM. Whereas the same engineer when he joins the IEM becomes a “Member” and “….. shall be entitled to the use of the title Engr. placed before (his/her) name”.

  28. The REA ’67 provides for the BEM to work closely with the IEM vis-à-vis the Engineers’ Code of Practice in most aspects.

  29. In the early days of the BEM and before the coming into force of the “Registration of Engineers Regulation 1990”; to be registered a Professional Engineer, the engineer must first have been accepted into the IEM as a Corporate Member.

  30. Even with the introduction of the BEM’s Professional Assessment Examination (PAE), the “equivalence” of IEM Corporate Membership with P.Eng status has been maintained. Section 10(2)(i)(b) says; Quote:- Subject to this Act, the following persons shall be entitled on application to be registered as Professional Engineers. Any person who has passed a PAE conducted by BEM, or is a Corporate Member of the IEM; Unquote.

  31. Section 7(i)(aa)(iii) of the REA ’67, on the issue of “Restriction on unregistered persons, Graduate Engineers etc”, says; Quote: No person shall, unless he is a Professional Engineer be certified to describe himself or hold himself out under any name, style or title using the abbreviation “Ir.” before his name or the abbreviation “P.Eng” after his name or in any way in association with his name. Unquote.

  32. Registration with the BEM is renewed annually ~ a “valid license to practise”; the rights of the natural person who’s a registered professional engineer having the title “Ir.”, and to use the stamp as prescribed in the Second Schedule of the Act.

  33. The Institution of Engineers, Malaysia (The IEM):- • The governance, management and administration of the IEM is by way of it’s Constitution, its Bylaws and its Regulations on Professional Conduct. • The encapsulation of what is IEM; is by way of the IEM’s Vision, Mission, Functions and Objectives, reproduced as follows:-

  34. THE INSTITUTION OF ENGINEERS, MALAYSIAVision, Mission, Functions and Objectives

  35. IEM’S VISION The Institution of Engineers, Malaysia aims to be the premier professional organization pivotal to Malaysia achieving Vision 2020.

  36. IEM’S MISSION • IEM shall promote sound professional engineering practice in support of the socio-economic development objectives of the nation. • IEM shall service the needs and interests of its members and the public and uphold the social standing and image of the engineering profession. • IEM shall contribute towards nation building and shall strive to enhance society’s consciousness of science, engineering and technology.

  37. IEM’S FUNCTIONS IEM is a society established to promote and advance the Science and Profession of Engineering in any or all its disciplines and to facilitate the exchange of information and ideas related to engineering.

  38. IEM’S OBJECTIVES The objectives of The Institution as set out in the Constitution shall include the following:- • to uphold meetings, exhibitions and visits, and such other activities as The Institution may deem incidental or conducive to the promotion or attainment of the profession of engineering; • to raise the character and status and advance the interests of the profession of engineering and those engaged therein;

  39. to promote honorable practice, and professional etiquette among members of The Institution; • to communicate to members information on all matters affecting the profession of engineering and to print, publish, issue and circulate such publications as may seem conducive to any of the objectives of The Institution; • to do such other things as The Institution may think incidental or conducive to the attainment of the objectives of The Institution.

  40. Membership in the IEM:- Corporate membership in the IEM, viz. MIEM and more so FIEM (in due course), is the measure for peer acceptance of professional standing and it further represents the time honoured public recognition hallmark of ethical professional excellence.

  41. The IEM welcomes engineers to become Corporate Members and hence attain the status of Professional Engineer, those who are: • Ethical, • Competent, • Intellectual, • Mature, and • Responsible.

  42. They shall prove to their peers that they are qualified to be M.I.E.M, because they are:- • able to analyse and solve engineering problems by the application of science, engineering and technological knowledge; • experienced and have the skills for good management and communications; • able to perform design, or able to integrate systems, and have relevant site experience; • confident and mature to assume responsibilities.

  43. IEM membership generally consists of “Engineers”: • Those who are engineering students who will one day graduate as “Engineers”; • Graduates enroute to be Corporate members in due course, • Corporate Members who form the greater part of the membership strength.

  44. Besides engineers, IEM offers membership to other engineering services professionals, such as:- • Incorporated Member; • Affiliate Member; and • Associate Member.

  45. The aforesaid exemplifies the IEM’s perspective; how about the aspect from the BEM? Registration of an engineer with the BEM equates to legal recognition of qualification(s) and a BEM license to practise as an ECP provides the benchmark for QA professional services meeting the expectations of public interest. Only ECP’s qualify to be UBBL defined “Submitting Persons” empowered to signing off the various forms aggregating to a project specific CCC.

  46. The Engineer’s Code of Ethics (COE)

  47. Why is the Code of Ethics important to engineers? • It is a HALLMARK of Professionalism; • A BASIC qualifying requirement; • An EDGE in competition; • Ultimate BENEFIT of the profession.

  48. Adhering to the Code of Ethics, the engineering profession will benefit in promoting its reputation, credibility and respect. The result: the engineering profession will maintain its attractiveness as a rewarding and respectable profession.

  49. The Engineer’s Code of Ethics is a constellation of noble ideals binding the following into a virtuous paradigm of what a Professional Engineer and his upright bearing should be:-

  50. The Profession: An Engineer shall at all times uphold the dignity, standing and reputation of the profession by his behaviour, actions and words.

More Related