1 / 8

Beamline 11.0.2 Mono residual steering effects

Beamline 11.0.2 Mono residual steering effects. toroid, with horizontal steering servo-loop to slits. exit slit. monochromator, with mirror and grating scanning. Generic Mono Modifications. -Chamber ports; *Reduce the number of flanges from 17 to 12 and view-ports from 9 to 3. -Level;

azuka
Download Presentation

Beamline 11.0.2 Mono residual steering effects

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Beamline 11.0.2 Monoresidual steering effects toroid, with horizontal steering servo-loop to slits exit slit monochromator, with mirror and grating scanning

  2. Generic Mono Modifications -Chamber ports; *Reduce the number of flanges from 17 to 12 and view-ports from 9 to 3. -Level; *Lower mounting surface. -Linear stage; *Change 5TPI ball-screw to 50TPI standard screw in order to stop possible movement during power failure.

  3. Generic Mono Modifications -Hard stop; *Add external hard stop to linear stages. -Bellows cover; *Add detent for firm attachment.

  4. Generic Mono Modifications -Cam Adjuster; *Increase outside diameter. *Add spanner holes. *Change reference flat. *Supply spanner wrench. -Invar Bracket; *Increase gusset thickness. *Add cross brace.

  5. Generic Mono Modifications -Optic Adjusters; *Reduce body height to remove potential binding. *Change spanner nut to standard nut. *Increase spring maximum load to 25 lbs. -Coolant tubes; *Reduce wall thickness for increased flexibility. -Bellows; *Reduce outside diameter for better flange screw clearance.

  6. Generic Mono Modifications ZOOM OUT

  7. Generic Mono Modifications -Bellows, sine-arm; *Reduce outside diameter, increase length and moved toward flange to increase screw clearance and assembly access. -Bellows, pre-mirror; *Reduce outside diameter to increase screw clearance. -Coolant tubes; *Reduce wall thickness for increased flexibility. -Mask, pre-mirror; *Remove large radius. -Optic adjuster; *Counter-bore cradle for increased travel.

  8. Generic Mono Modifications -Pre-mirror angular Travel; *Increase range by 2 degrees. -Range: 0-6 degrees. -Center: 3 degrees -Grating angular travel; *increase range by 1.0 degree and move center by 0.5 degrees. -Range: 0-10 degrees. -Center: 5 degrees ( Zero degrees was added for alignment purposes )

More Related