1 / 45

Solid-Liquid Separation in Water Treatment Settling and Flotation

Solid-Liquid Separation in Water Treatment Settling and Flotation. J(Hans) van Leeuwen, DEE. Introduction. The need to clarify water - Aesthetic and health reasons Technologies available. Topics of Discussion. Separation by settling Separation by flotation

baby
Download Presentation

Solid-Liquid Separation in Water Treatment Settling and Flotation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Solid-Liquid Separation in Water TreatmentSettling and Flotation J(Hans) van Leeuwen, DEE water treatment

  2. Introduction The need to clarify water - Aesthetic and health reasons Technologies available water treatment

  3. Topics of Discussion • Separation by settling • Separation by flotation • Direct filtration • Softening water treatment

  4. Typical surface water treatment process T R E A t   Ferric/ Alum Screen Ferric/alum sludge water treatment

  5. Typical water treatment process with lime softening Ca(OH)2 Lime   OR  Lime sludge water treatment

  6. Solid- liquid separation in water treatment Typical layout of a water treatment plant water treatment

  7. Analysis of Forces Acting On a Settling Particle water treatment

  8. Terminal Velocity of a Particle An expression for Vs from the submerged weight of the particle, W, and the fluid drag force, D. The drag force on a particle is given by D = CDlAp Vt2/2 The submerged weight of the particle can be expressed as W = ( - l)g s Since D = W, the above, after substituting Ap and p for particle diameter d   _______________ Vt = /4 ( - l) gd  3l CD water treatment

  9. Stokes’s Law Re < 1, CD = 24 /Re Vs=g ( -l) d2 18  Vs=2 ( -l)gr2 9 water treatment

  10. water treatment

  11. (20-40 m3m-2d-1) water treatment

  12. water treatment

  13. water treatment

  14. water treatment

  15. water treatment

  16. water treatment

  17. water treatment

  18. water treatment

  19. water treatment

  20. Activated Sludge Mass Balance over Settler water treatment

  21. Weir Details water treatment

  22. LAMELLA SETTLING TANKS: Shortening the settling distance Pipe bundles also used water treatment

  23. (20 – 40 m3m-2d-1 or 0.8 – 1.7 m/h) (2.5 mm/s) – limits weir loading rate to 100 – 200 m3m-1d-1 water treatment

  24. Sludge Thickening Design water treatment

  25. FLOTATIONSeparation of low density flocs If flocs have a density very close to that of water, it may be necessary to decrease their density by adding gas bubbles water treatment

  26. Archimedes’s Principle Examination of the nature of buoyancy shows that the buoyant force on a volume of water and a submerged object of the same volume is the same. Since it exactly supports the volume of water, it follows that the buoyant force on any submerged object is equal to the weight of the water displaced. This is the essence of Archimedes principle. water treatment

  27. FLOTATIONSeparation of low density flocsMethods of forming gas bubbles • Diffusion • Vacuum • Electrolysis • Dissolved air water treatment

  28. Surface Tension and Bubbles • The surface tension of water provides the wall tension • for the formation of bubbles. To minimize the wall tension the bubble pulls into a spherical shape (LaPlace's law). • Pressure difference between the inside and outside of a bubble depends upon the surface tension and the radius of the bubble. Visualize the bubble as two hemispheres • Note the internal pressure which tends to push the hemispheres apart is counteracted by the surface tension acting around the circumference of the circle. • For a bubble with two surfaces providing tension, the pressure relationship is: Po Pi Pi Pi – Po = 4T/r T water treatment

  29. La Place's Law The larger the vessel radius, the larger the wall tension required to withstand a given internal fluid pressure. For a given vessel radius and internal pressure, a spherical vessel will have half the wall tension of a cylindrical vessel. water treatment

  30. Wall Tension water treatment

  31. Why does wall tension increase with radius? If the upward part of the fluid pressure remains the same, then the downward component of the wall tension must remain the same. If the curvature is less, then the total tension must be greater in order to get that same downward component of tension. water treatment

  32. Bubble Pressure • Net upward force on the top hemisphere of the bubble: Fupward = (Pi – Po)πr2 • The surface tension force downward around circle is twice the surface tension times the circumference, since two surfaces contribute to the force: Fdownward = 2T(2πr) Pi – Po = 4T/r for a spherical bubble Pi – Po = 2T/r for half a bubble Po Pi Pi T water treatment

  33. Attachment to floc • Ratio of area/volume increases with decreasing size • Forces acting on a gas bubble: Internal pressure x area = surface tension x circumference • Easier for bubble to form against solid water treatment

  34. water treatment

  35. water treatment

  36. Stokes’s law for flotation water treatment

  37. Essential Elements in a Flotation Unit Process water treatment

  38. Dissolved Air Flotation water treatment

  39. water treatment

  40. Saturation tank for flotation water treatment

  41. Overview of solid-liquid separation alternatives in water Direct Filtration water treatment

  42. water treatment

  43. water treatment

  44. water treatment

  45. What you need to be able to do • Be able to size settling tanks on the basis of particle settling rates and identify important zones in the settling tank • Be able to do a mass balance over a flotation unit to account for air usage • Be able to size a flotation unit based on particle sizes and densities water treatment

More Related