1 / 8

Otari Series 54 – Control Room Module

Otari Series 54 – Control Room Module. “Sources”. Solo Level. Tape 1-4. Studio. AFL or PFL Solo. Cue 1 or 2. Stereo or Mono. Stereo A or B bus. Control Room Level. Dim (18 dB). On / Off. Otari Series 54 – Control Room Module. Source – source of signal to the control room module

bailey
Download Presentation

Otari Series 54 – Control Room Module

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Otari Series 54 – Control Room Module “Sources” Solo Level Tape 1-4 Studio AFL or PFL Solo Cue 1 or 2 Stereo or Mono Stereo A or B bus Control Room Level Dim (18 dB) On / Off

  2. Otari Series 54 – Control Room Module • Source – source of signal to the control room module • DIM drops the level in the monitors by 16 dB • Solo • AFL = post fader source (after fader listen) • PFL = pre fader source (pre fader listen) • Mode • L = left signal in both monitors • R = right signal in both monitors • L + R = mono signal (sums L and R)

  3. Otari Series 54 – Cue / Effects Module “Sources” EQ Aux 1-10 Comm Level Stereo A and B Balance Studio Level Control Room Stereo or Mono Dim (18 dB) Solo On / Off

  4. Otari Series 54 – Cue / Effects Module • Source – source of signal to the Cue or Effects module • Comm Level – level of talkback mic • Balance and Level – balance and level of the Cue or Effects module • Solo – solos the Cue or Effects module • Mode • L = left signal in both monitors • R = right signal in both monitors • L + R = mono signal (sums L and R) • EQ – low and high shelving EQ for the module

  5. Otari Series 54 – Comm Module Destination To Cue 1 or 2 To Slate To Studio COMM B Engage Talkback Mic COMM A

  6. Otari Series 54 – Comm Module • Destinations • Cue 1 – to Cue 1 • Cue 2 – to Cue 2 • Studio – to studio monitors (not control room) • Slate – to tape* • *Requires one channel not set to “DIR” in the assign matrix

  7. Otari Series 54 – Miscellaneous Functions Module Monitors Bypasses Automation Speaker Enable Meyer 833 Monitors Meyer HD-1 Monitors

  8. Otari Series 54 – Miscellaneous Functions • VCA Bypass – both always on • Speaker Enable – to hear the left and right monitors • Speaker A – Meyer 833 monitors (wall mounted) • Speaker B – Meyer HD-1 monitors (near field)

More Related