1 / 13

ENTC 303: Announcements

ENTC 303: Announcements. Homework assignment #7 From Mott:11.1, 11.3, 11.5, 11.9, 11.16. Due Thursday, November 6 th before 3:35 pm For more information, go to: http://etidweb.tamu.edu/classes/entc303/ Exam II: November 20 th ( Thu) Chapters: Mott’s 8 – 12 Homeworks : 5 – 8.

barrett-scott
Download Presentation

ENTC 303: Announcements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ENTC 303: Announcements • Homework assignment #7 • From Mott:11.1, 11.3, 11.5, 11.9, 11.16. • Due Thursday, November 6thbefore 3:35 pm • For more information, go to: • http://etidweb.tamu.edu/classes/entc303/ • Exam II: November 20th (Thu) • Chapters: Mott’s 8 – 12 • Homeworks: 5 – 8

  2. Society of Manufacturing Engineers SME chapter S099 WE GET HIRED WHAT: 3ndGeneral Meeting WHERE: THOM 112D WHEN: 7 pm, Monday, Nov 3rd , 2014 GUEST SPEAKER:

  3. Chapters 11 & 12: Pipe Line Systems • Series • Parallel • Or combination of both Series Parallel

  4. Series Pipe Line Systems • Class I • Known: pipe size, types of minor losses, flow rate • Goal: To determine pressure at a specific point, total head or elevations • Class II • Known: pipe size, types of minor losses, elevations, and pressure at specific points • Goal: To determine flow rate

  5. Series Pipe Line Systems • Class III • Known: Flow rate and general layout • Goal: To determine pipe size • Solution methods • http://etidweb.tamu.edu/classes/entc303/

  6. Class I: Series Pipe Line Systems • hL = Energy losses due: • Pipe friction • Minor losses • Valves • Exit and entrance losses • Enlargements/Contractions • Bends/elbows

  7. Class I: Example • Calculate the power supplied to the pump in Fig. 11.2. The pump is 76% efficient, methyl alcohol flows at 0.015 m3/sec at 25° C. The suction pipe diameter is 102.3 mm, and 15 m long. The discharge pipe diameter is 52.5 mm, and 200 m long. The entrance is square-edged type, the elbows are standard and the globe valve is fully open.

  8. Moody Chart D/e f Re

  9. Class II: Example • Oil flows in 6-in pipe (SCH 40) steel pipe with a pressure drop of 60 kPa per 100 m. S.G. = 0.88, m = 9.5 x 10-3 Pa-sec. Determine the flow rate.

  10. Moody Chart D/e f Re

  11. Example • A lubricating oil needs to be pumped from 1 to 2 with a maximum pressure drop of 60 kPa. The oil’s S.G. is 0.88, m = 9.5 e 10-3 Pa-s. Determine the flow rate, class type and solution method.

More Related