1 / 46

Chapter 10

Chapter 10. Analysis of Variance. Chapter 10 - Chapter Outcomes. After studying the material in this chapter, you should be able to: Recognize the applications that call for the use of analysis of variance. Understand the logic of analysis of variance.

baylee
Download Presentation

Chapter 10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 10 Analysis of Variance

  2. Chapter 10 - Chapter Outcomes After studying the material in this chapter, you should be able to: Recognize the applications that call for the use of analysis of variance. Understand the logic of analysis of variance. Be aware of several different analysis of variance designs and understand when to use each one. Perform a single factor hypothesis test using analysis of variance manually and with the aid of Excel or Minitab software.

  3. Chapter 10 - Chapter Outcomes(continued) After studying the material in this chapter, you should be able to: Conduct and interpret post-analysis of variance pairwise comparisons procedures. Recognize when randomized block analysis of variance is useful and be able to perform the randomized block analysis. Perform two factor analysis of variance tests with replications using Excel or Minitab and interpret the output.

  4. One-Way Analysis of Variance One-way analysis of variance is a design in which independent samples are obtained from k levels of a single factor for the purpose of testing whether the k levels have equal means.

  5. One-Way Analysis of Variance A factor refers to a quantity under examination in an experiment as a possible cause of variation in the response variable.

  6. One-Way Analysis of Variance Levels refer to the categories, measurements, or strata of a factor of interest in the current experiment.

  7. One-Way Analysis of Variance Null hypothesis in an ANOVA experiment: Alternative hypothesis in an ANOVA experiment:

  8. One-Way Analysis of Variance COMPLETELY RANDOMIZED DESIGN An experiment is completely randomized if it consists of the independent random selection of observations representing each level of one factor.

  9. One-Way Analysis of Variance BALANCED DESIGN An experiment is said to have a balanced design if the factor levels have equal sample sizes.

  10. One-Way Analysis of Variance The ANOVA test is based on three assumptions: • All populations are normally distributed. • The population variances are equal. • The observations are independent, meaning that any one individual value is not dependent on the value of any other observation.

  11. One-Way Analysis of Variance Total Variation The total variation in the data refers to the aggregate dispersion of the individual data values across the various factor levels.

  12. One-Way Analysis of Variance Within-Sample Variation The dispersion that exists among the data values within a particular factor level is called the within-sample variation.

  13. One-Way Analysis of Variance Between-Sample Variation The dispersion among the factor sample means is called the between-sample variation.

  14. One-Way Analysis of Variance PARTITIONED SUM OF SQUARES where: TSS = Total Sum of Squares SSB = Sum of Squares Between SSW = Sum of Squares Within

  15. One-Way Analysis of Variance Null hypothesis in an ANOVA experiment: Alternative hypothesis in an ANOVA experiment:

  16. One-Way Analysis of Variance F-Max test for Equal Variances where: s2max = Largest sample variance s2min = Smallest sample variance

  17. One-Way Analysis of Variance TOTAL SUM OF SQUARES where: TSS = Total sum of squares k = Number of populations (levels) ni = Sample size from population i xij = jth measurement from population i = Grand Mean (mean of all the data values)

  18. One-Way Analysis of Variance SUM OF SQUARES BETWEEN where: SSB = Sum of Squares Between Samples k = Number of populations (levels) ni = Sample size from population i = Sample mean from population i = Grand Mean

  19. One-Way Analysis of Variance SUM OF SQUARES WITHIN SSW = TSS - SSB or where: SSW = Sum of Squares Within Samples k = Number of populations ni = Sample size from population i = Sample mean from population i xij= jth measurement from population i

  20. One-Way ANOVA Table(Table 10-3) Source of SS df MS F Ratio Variation Between SSB k - 1 SSB K-1 Samples MSB MSW Within SSW N-k N - k SSW Samples Total TSS N - 1 k = Number of populations N = Sum of the sample sizes from all populations df = Degrees of freedom

  21. One-Way ANOVA Table(Table 10-3)

  22. Example of a One-Way ANOVA Table(Table 10-4) Source of SS df MS F Ratio Variation 7.333 Between 7.333 22 3 Samples 7.10286 Within 198.88 = 1.03244 28 7.10286 Samples Total 220.88 31

  23. One-Way Analysis of Variance (Figure 10-5) H0: 1= 2 = 3 = 4 HA: At least two population means are different  = 0.05 Degrees of freedom: D1 = k - 1 = 4 - 1 = 3 D2 = N - k = 32 - 4 = 28 Rejection Region F 0 Since F=1.03244  F= 2. 95, do not reject H0

  24. The Tukey-Kramer Procedure The Tukey-Kramer procedure is a method for testing which populations have different means, after the one-way ANOVA null hypothesis has been rejected.

  25. The Tukey-Kramer Procedure and One-Way ANOVA The experiment-wide error rate is the proportion of experiments in which at least one of the set of confidence intervals constructed does not contain the true value of the population parameter being estimated.

  26. The Tukey-Kramer Procedure and One-Way ANOVA TUKEY-KRAMER CRITICAL RANGE where: q = Value from standardized range table with k and N - k degrees of freedom for the desired level of . MSW = Mean Square Within ni and nj = Sample sizes from populations (levels) i and j, respectively.

  27. Randomized Complete Block ANOVA A treatment is a combination of one level of each factor in an experiment associated with each observed value of the response variable.

  28. Randomized Complete Block ANOVA SUM OF SQUARES PARTITIONING - RANDOMIZED COMPLETE BLOCK DESIGN where: TSS = Total sum of squares SSB = Sum of squares between factor levels SSBL= Sum of squares between blocks SSW = Sum of squares within levels

  29. Randomized Complete Block ANOVA SUM OF SQUARES FOR BLOCKING where: k = Number of levels for the factor n = Number of blocks = The mean of the jth block = Grand Mean

  30. Randomized Complete Block ANOVA SUM OF SQUARES WITHIN

  31. Randomized Complete Block ANOVA The randomized block design requires the following assumptions: • The populations are normally distributed. • The populations have equal variances. • The observations are independent.

  32. Randomized Block ANOVA Table(Table 10-7) Source of F Ratio SS df MS Variation MSBL Between b- 1 SSBL MSBL MSW Blocks MSB Between SSB k - 1 MSB MSW Samples Within SSW (k - 1)(b - 1) MSW Samples Total TSS N - 1 k = Number of levels b = Number of blocks df = Degrees of freedom and N = Combined sample size

  33. Randomized Block ANOVA Table(From Table 10-7) where:

  34. Randomized Block ANOVA(Figure 10-12) H0: 1= 2 = 3 HA: At least two population means are different  = 0.05 Degrees of freedom: D1 = k - 1 = 3 - 1 = 2, D2 = (n - 1)(k - 1) = (4)(2) = 8 Rejection Region F 0 Since F=8.544 > F= 4.4589, reject H0

  35. Fisher’s Least Significant Difference (LSD) Test FISHER’S LEAST SIGNIFICANT DIFFERENCE FOR COMPLETE BLOCK DESIGN where: t/2 = Upper-tailed value from Student’s t- distribution for /2 and (k -1)(n - 1) degrees of freedom MSW = Mean square within from ANOVA table n = Number of blocks k = Number of levels

  36. Two-Factor Analysis of Variance Two-factor ANOVA is a technique used to analyze two factors in an analysis of variance framework.

  37. Two-Factor Analysis of Variance(Figure 10-13) SSA Factor A SST SSB Factor B Interaction Between A and B SSAB Inherent Variation (Error) SSE

  38. Two-Factor Analysis of Variance The necessary assumptions for the two factor ANOVA are: • The population values for each combination of pairwise factor levels are normally distributed. • The variances for each population are equal. • The samples are independent. • The observations are independent.

  39. Randomized Block ANOVA Table(Table 10-9) Source of F Ratio SS df MS Variation MSA Factor A SSA a- 1 MSA MSE MSB Factor B SSB b - 1 MSB MSE AB Interaction MSAB (a - 1)(b - 1) MSAB SSAB MSE Error SSE N - ab MSE Total TSS N - 1 a = Number of levels of factor A b = Number of levels of factor B N = Total number of observations in all cells

  40. Randomized Block ANOVA Table(From Table 10-9) where:

  41. Two Factor ANOVA Equations Total Sum of Squares: Sum of Squares Factor A: Sum of Squares Factor B: Sum of Squares Interaction Between A and B: Sum of Squares Error:

  42. Two Factor ANOVA Equations where: a = Number of levels of factor A b = Number of levels of factor B n’ = Number of replications in each cell

  43. Differences Between Factor Level Mean Values: No Interaction Mean Response Factor B Level 1 Factor B Level 4 Factor B Level 3 Factor B Level 2 1 2 3 Factor A Levels

  44. Differences Between Factor Level Mean Values: Interaction Present Factor B Level 1 Factor B Level 2 Mean Response Factor B Level 3 Factor B Level 4 1 2 3 Factor A Levels

  45. A Caution About Interaction When conducting hypothesis tests for a two factor ANOVA: • Test for interaction. • If interaction is present conduct a one-way ANOVA to test the levels of one of the factors using only one level of the other factor. • If no interaction is found, test factor A and factor B.

  46. Balanced Design Between-Sample Variation Completely Randomized Design Experiment-Wide Error Rate Factor Key Terms • Levels • One-Way Analysis of Variance • Total Variation • Treatment • Within-Sample Variation

More Related