250 likes | 589 Views
CE 636 - Design of Multi-Story Structures T. B. Quimby UAA School of Engineering. Gravity Force Resisting Systems. Basic Elements. • Horizontal Systems (Floors & Roofs) – Joists, purlins , girders – One-way slabs – Two-way slabs – Waffle Slabs – Flat plates – Space Trusses
E N D
CE 636 - Design of Multi-Story Structures T. B. Quimby UAA School of Engineering Gravity Force Resisting Systems
Basic Elements • • Horizontal Systems (Floors & Roofs) • – Joists, purlins, girders • – One-way slabs • – Two-way slabs • – Waffle Slabs • – Flat plates • – Space Trusses • • Vertical Components • – Columns • – Load Bearing Walls • • Horizontal systems are generally unaffected by lateral loads • • Vertical components often are affected by both gravity and lateral loads.
Joists, Girders, Purlins • The system consists of: • a horizontal slab or sheathed surface. • a system of beams (i.e. joists, purlins, girders) supporting the bearing surface. • columns or walls that support the beam system.
Steel Deck • Use manufacturers load tables. • Used without concrete for roof decks • Used with concrete for floor decks. • Lots of different profiles and gage thicknesses. • Design connection to supports for diaphragm shears
Steel Joists • Use Manufacturer's Span Tables • Industry standards have been produced by the Steel Joist Institute. • Most manufacturers build their joist to SJI specifications
One-Way Slabs • Slab spans between supports on two opposite sides • Generally true for slabs with an aspect ratio of 3:1 or more. • Analyzed and Designed as a beam without shear reinforcement.
One-Way Slab and Beam Behavior • Reference #1, pg. 164
Two-Way Slabs • Support on all edges. • May be “fixed” or “free” at supports. • Moments and shears are somewhat less than seen in one-way slabs of comparable span. • Precise analysis is somewhat complex.
Approximate Flat Slab Behavior • Reference #1, pg. 15
May use Stiff Beams for support • Reference #1, pg. 161
Waffle Slabs • A grid consisting on beams running in two directions. • Slab spans between joists. • Easy to construct with reusable “pans”. • Fairly common in areas that use lots of concrete.
Concrete Waffle Slab • Reference #1, pg. 192
Waffle Slab Behavior • Reference #1, pg. 168
Flat Plates • Slabs supported by columns only. • Slab is divided into strips. • Each strip is designed as a beam to carry a portion of the load. • Punching shear at columns is often a critical problem. • The problem becomes very complex if the columns are not laid out on a rectangular grid.
Flat Slab Supported on Square Column Grid • Reference #1, pg. 163
Punching Shear Resistance • Reference #1, pg. 169
Space Trusses • Generally steel, sometimes wood or concrete. • Used mostly for exposed for roof structures. • Can be used to achieve many different shapes. • Often used for long span roof structures.
Roof for a High School Gym • Reference #2, pg. 54
Alternative Truss Layouts • Reference #1, pg. 198
References • Lin, T.Y., and Stotesbury, S.D., Structural Concepts and Systems for Architects and Engineers, 2nd edition, Van Nostrand Reinhold, 1988. • Ambrose, J., Building Structures, Wiley Interscience, 1988. • Council on Tall Buildings & Urban Habitat, Advances in Tall Buildings, Van Nostrand Reinhold, 1986.