50 likes | 199 Views
Memory leaking in QMSS ?. Conditions. Refer to this e2e thread. To recreate the issue, please use the packages attached to this e2e thread. Run core0/1 first, an then core3 ….
E N D
Conditions • Refer to this e2e thread. • To recreate the issue, please use the packages attached to this e2e thread.
Run core0/1 first, an then core3 … ② Next, start Core3 (NDK client). NDK will try to insert memory to QMSS region 1 in its initialization phase. This snap shot is showing, core3 is trying to insert the descriptor @0x1380000~ into region1. Now put F5 !!! Once this line is executed, the next slide happened. ① Core0/1 (SRIO loopback) is started. As you see, core0 is working correctly. Note that Core0 is using the descriptor @0x1083xxxx~
Result: Core0 starts to get the descriptor @ 0x1380xxxx! This address range is the descriptor on core3. Eventually, Core3 can hang-up.
Questions • It looks like leaking memory between region0 and region1. Why this can happen ? • Is this QMSS bug ?