1 / 11

Payload Subsystem Integration and Testing Report

Payload Subsystem Integration and Testing Report. Universities/Institutions Team Members Date. User Notes. This template shall be followed as closely as possible. Mission Overview. Briefly remind everyone what your mission is. Functional Block Diagram.

betrys
Download Presentation

Payload Subsystem Integration and Testing Report

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Payload Subsystem Integration and Testing Report Universities/Institutions Team Members Date

  2. User Notes • This template shall be followed as closely as possible.

  3. Mission Overview • Briefly remind everyone what your mission is.

  4. Functional Block Diagram • A Functional block diagram of the entire system should be presented here. • By now, your payload should have excellent block diagrams after CDR completion. • Use this diagram as a basis/reference as you explain to me how things integrated together. • Be sure to define subsystem acronyms

  5. Integration Procedure • How did you integrate your various subsystems? • To what level (Full system or just subsystem to subsystem?) • i.e. • Power board verified, then connected to main board • Powered up main board and verified voltages at all sensors • Connected control board.... Blah, blah, blah • After testing electrical boards, mounted to RockSat-X plate • Mounted mechanical boom to plate • Connected mechanical boom to control board... Blah, blah, blah • Show pictures! I am hoping to see components fitting together Integrating the tether spool onto the power and unpowered hubs (EXAMPLE Picture and description)

  6. Results • What went wrong? • What will be done to remedy the problem? • What lesson (if any) was learned? • Pictures! • What went right? • Pictures • Best practices • What advice could you give to next year’s team?

  7. Integrated Subsystem Testing • Once integrated, did you test any of the integrated subsystems? • Why did you perform the test that you did? • If you didn’t test integrated subsystems, why not? • If you had a failure, which prevented testing, how will you move forward? • Pictures! Control board mounted to main board Testing functionality of push-button state changes in software (EXAMPLE)

  8. Testing Results • Did everything work as planned? • Did all electronics communicate? • Did the software work with all subsystems? • Did the sensors return reasonable data? • Will the sensors need calibration? • Most importantly, just summarize your findings • What needs to change before flight? • Action items… Push-button Software Control: Success Successfully changed software states through push-buttons. No changes required for flight Main and Control boards could NOT be integrated into structure due hole misalignment. Next revision of board will have correct hole alignment. EXAMPLE

  9. SITR to DITL 1 • What is your plan from now until your first Day In The Life (DITL) testing report?

  10. Concluding Remarks • Issues and concerns • Closing remarks

  11. Appendix • Additional data not immediately relevant to the presentation • You should include copies of updated: • Mechanical Drawings • Electrical Schematics • Power Budget • ICDs

More Related