1 / 6

Capillary Rise

Capillary Rise. 2D/Zero Contact Angle. Y-L:. Quantitative Capillary Rise. In our 2-D case, there is only one radius of curvature. 122 lu. Gravity and Bond Number. No Gravity. Gravity. 2x Gravity. G ravitational/capillary forces g gravitational acceleration

Download Presentation

Capillary Rise

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Capillary Rise

  2. 2D/Zero Contact Angle • Y-L:

  3. Quantitative Capillary Rise • In our 2-D case, there is only one radius of curvature 122 lu

  4. Gravity and Bond Number No Gravity Gravity 2x Gravity • Gravitational/capillary forces • g gravitational acceleration • r characteristic pore radius • Dr difference in fluid densities • g interfacial tension between fluids Surface tension

  5. Exercise • The water-water vapor interfacial tension is 72.13 x 10-3 N m-1 at 25C. Compute the capillary rise in a clean glass slit of radius 0.001 m in the Earth’s gravitational field. We choose a slit to reduce the problem to a 2 dimensional one, in which there is only one possible radius of curvature. Assume the contact angle is zero. Show all units. • Compute the Bond number for the capillary rise problem above.

  6. Exercise continued • Propose and run a lattice Boltzmann model illustrating capillary rise at the same Bond number. Remember that r should be at least 5 or so lattice units and that the ‘pool’ of liquid that the capillary will be immersed into should be wide enough that a pool height unaffected by capillary rise can serve as a reference level for measuring the liquid rise in your capillary. What is the expected capillary rise in your model? Show all calculations and units. • Remember to use a surface adhesion parameter that corresponds closely to a zero contact angle; too big or too small may cause problems. You may be able to estimate an appropriate value from the previous exercise where you simulated different contact angles (some refinement of this may also be needed). • Provided you use the ‘standard’ parameters Y0 = 4, r0 = 200, and G = -5, the lattice Boltzmann liquid-vapor interfacial tension is 13.85 lu mu ts-2. • Plot the steady-state result of your model. What is the observed capillary rise? Compare the ratio h/r for the case on Earth, the predicted LB case, and the simulated case.

More Related