1 / 9

Ultra-Premium Efficiency Motor Standard Protocol Recommendation

Ultra-Premium Efficiency Motor Standard Protocol Recommendation. Regional Technical Forum November 19, 2013. Presentation Outline. Staff Highlighted Areas Measure Definition Measure History Regional Interest RTF Decision. Photo from www.ebay.com. Staff Highlighted Areas.

bill
Download Presentation

Ultra-Premium Efficiency Motor Standard Protocol Recommendation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ultra-Premium Efficiency Motor Standard Protocol Recommendation Regional Technical Forum November 19, 2013

  2. Presentation Outline • Staff Highlighted Areas • Measure Definition • Measure History • Regional Interest • RTF Decision Photo from www.ebay.com

  3. Staff Highlighted Areas • Measure deactivation • Staff recommends deactivating the current RTF deemed calculator and stopping development of a standard protocol due to: • A lack of regional interest in the measure; • Data deficiencies that would require either interest in a provisional standard protocol or additional staff time to rework protocol as a ‘small saver;’ and • Staff time and budget considerations (i.e., is it worth it to continue working on this?)

  4. Measure Definition • Installation of an ultra-premium efficiency motor in place of a baseline motor • Applies to “general purpose” motors between 1 and 500 HP • Baseline motor is defined as the NEMA Premium efficiency standard in the 1-200 HP range, and the average EPAct motor efficiency in the 250-500 HP range • Ultra-premium efficiency motors must have a nominal efficiency at least one full NEMA band higher than the base NEMA Premium efficiency

  5. Measure History • June 2003 – Premium Efficiency Motor Deemed Calculator adopted by RTF • Feb. 2011 – Premium Efficiency Motor Deemed Calculator put under review due to updated federal standards • Nov. 2012 – Cascade Energy presented Ultra-Premium Efficiency Motor Standard Protocol and calculator to replace current calculator • RTF questioned ability to use default tables for motor load factor and operating hours • RTF voted to delay action on protocol / suggested protocol could be a “small saver”

  6. Regional Interest • Reached out to BPA about interest in the protocol • BPA staff pointed to current issues surrounding ultra-premium efficiency motors in the market: • Motor manufacturers pushing back against ultra-premium motor rebates due to high production costs (e.g. costs of re-tooling, “super-alloy" materials) • Manufacturers concerned rebates will drive further motor standards and thus increase costs

  7. Regional Interest (continued) • As a result, NEMA and ACEEE have formed a national working group to develop standards for rating motor systems • NEEA, ETO, and BPA are all participating in the working group • Other market issues have been raised • Motors entering the market from overseas with no standardized efficiency testing, but receiving a nameplate rating equivalent to ultra-premium

  8. Regional Interest (continued) • Reached out to other utilities to gauge interest in continuing the development of the protocol: • Avista, PacifiCorp, PSE • Avistaand PacifiCorp indicated they were not interested in further development (along with BPA)

  9. RTF Decision “I _________ move that the RTF deactivate the current RTF Premium Efficiency Motor deemed calculator and stop development of a standard protocol.”

More Related