Transformer Manufacturers in Pune - Starlit Electricals

2. High Tension Current Transformer • High Tension Current Transformer is used to measure the current for HT consumer. • Starlit Electricals is counted among the leading manufacturers of Current Transformers that are broadly used to produce electric current. • We manufacture a comprehensive range of standard C.Trs.

3. Three Phase Transformer • Three phase power is used by electric power distribution grids and to power large motors and other large loads. • Three phase transformers carry many product specifications, including transformer type, winding turns, cooling method, core type, and mounting style. Performance specifications, regulatory approvals, and special features are also important parameters to consider.

4. Single Phase Transformer • Single phase transformers may be used to increase or decrease the voltage from one side of the transformer to the other. The turn ratio or number of windings on the primary and secondary sides of the device determines the change in voltage.

5. Lighting Transformers • Lighting Transformers are designed to supply power to lighting equipment in a commercial / industrial / domestic unit. Its primary supply connected to higher voltage 3Ph source and secondary is to be connected to load. • Lighting transformers serves as isolation between primary and secondary, it also restricts any high voltage spikes and EMF coming with the raw mains incoming power.

6. Distribution Transformer • The purpose of a distribution transformer is to reduce the primary voltage of the electric distribution system to the utilization voltage serving the customer. • A distribution transformer is a static device constructed with two or more windings used to transfer alternating current electric power by electromagnetic induction from one circuit to another at the same frequency but with different values of voltage and current.

7. Earthing Transformer • The rated voltage of an Earthing or grounding transformer is the line to line voltage on which it is intended to be used. • Current rating of this transformer is the maximum neutral current in Amperes that the transformer is designed to carry in fault condition for a specific time. • .

8. High Voltage Tester • High voltage tester of breakdown voltage testers( B D V testers) are useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. to ascertain quality of insulation material before planning their usage in electrical applications.

9. Auto Transformer for Starting Induction Motor • A 3 Ph Star connected Auto transformer with a changeover switch forms an Auto Transformer starter. Initially the stator of the induction motor is supplied with reduced voltage through the Auto Transformer using a suitable tap. • This limits the starting current to a safe value. The loading the system and power loss involved are less in this type and it can be used in delta as well as star connected motors.

10. Residual Voltage Transformer • RVTs are used for residual earth fault protection and for discharging capacitor banks. • The secondary residual voltage winding is connected in open delta. Under normal conditions of operation, there is no voltage output across the residual voltage winding.

11. Voltage Transformer • Starlit Electricals is leading manufacturer and supplier of Voltage Transformer in Pune. • The Voltage Transformer isolates the devices connected to their secondary circuit from the network system. The main function of the Voltage Transformer is to reproduce the Primary Voltage on its secondary side.

12. Contact Us Starlit Electricals • Contact Person: Mr. Amol Keskar • Mob: +91 9689323539 • Web Site: www.starlitelectricals.com • Address :Piyushdhara, Near Akurdi Post Office   • Area: Akurdi • City: Pune – 411035

13. Thank You