1 / 14

Xiangying Qian xq2120@columbia

PAPER PRESENTATION Real-Time Coordination of Plug-In Electric Vehicle Charging in Smart Grids to Minimize Power Losses and Improve Voltage Profile IEEE TRANSACTIONS OF SMART GRID, VOL. 2, NO. 3, SEPTEMBER 2011. Xiangying Qian xq2120@columbia.edu. STEP1: FIND THE OBJECTIVE.

bradley-terry
Download Presentation

Xiangying Qian xq2120@columbia

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PAPER PRESENTATIONReal-Time Coordination of Plug-In Electric Vehicle Charging in Smart Grids to Minimize Power Losses and Improve Voltage ProfileIEEE TRANSACTIONS OF SMART GRID, VOL. 2, NO. 3, SEPTEMBER 2011 XiangyingQian xq2120@columbia.edu

  2. STEP1: FIND THE OBJECTIVE • It proposes a real-time smart load management (RT-SLM) strategy for coordinating multiple plug-in electric vehicles (PEV) charging activities in a smart grid based residential network. • The sensitivities-based RT-SLM enables PEVs to begin charging as soon as possible within the priority time zones specified by the consumer, while complying with network operation criteria to maintain the reliability and security of smart grids.

  3. STEP1: FIND THE RESULTS • RT-SLM is capable of real-time coordination of PEVs, which significantly improves the efficiency and economy of smart grids. • RT-SLM respects PEV owner designated charging priority as long as system constraints are not violated. • RT-SLM helps reduce overall system overloads and power peaks. • MSS based RT-SLM offers fast and adaptable coordination strategy to cope with frequent and random nature of PEV charging activities.

  4. STEP2: OUTLINE THE PROCEDURES 1. Importance of Research on Coordinated Charging - growing popularity of PEV - problem of uncoordinated charging activities - development of smart grid technologies - recent related work

  5. STEP2: OUTLINE THE PROCEDURES(contd) 2. Formulation of PEV Charging Problem - system constraints - objective function

  6. STEP2: OUTLINE THE PROCEDURES(contd) 3. Development of RT-SLM Algorithm - overview of RT-SLM - charging zone and priority scheme - PEV coordination based on maximum sensitivities selection (MSS) optimization - the proposed RT-SLM algorithm

  7. STEP2: OUTLINE THE PROCEDURES(contd) 4. Topology of Smart Grid Distribution System - system topology - PEV energy requirements - PEV battery chargers - assumed load profiles - PEV penetration levels - designated PEV priorities

  8. STEP2: OUTLINE THE PROCEDURES(contd) 5. Discussion of Simulation Results - 4 PEV charging scenarios - 4 different penetration levels: 16%, 32%, 47%, 63% - 3 designated time zones: 6pm—10pm, 10pm—1am, 1am—8am - 4 types of measurement: system power consumption, voltage deviation at worst node, total system losses, algorithm computing time

  9. STEP3: UNDERSTAND SECTION 2 IN DETAIL • System constraints: • Objective function: where

  10. STEP3: UNDERSTAND SECTION 3 IN DETAIL • RT-SLM will decide which PEVs charge at what time by minimizing objective cost function (3) given system constraints (1) and (2). • Load variations and energy pricing over a 24h cycle as well as PEV owner preferences for charging time zone are taken into account.

  11. STEP3: UNDERSTAND SECTION 3 IN DETAIL • MSS optimization approach is computationally efficient. • MSS quantifies the objective function sensitivities (system losses) to PEV charger loads in the smart grid at a given time step. • MSS vector is sorted such that PEVs resulting in highest sensitivities in each priority group are selected last. • MSS sorting process is repeated for descending priority groups; a sorted PEV queue table corresponds with MSS values.

  12. STEP3: UNDERSTAND SECTION 3 IN DETAIL

  13. STEP3: UNDERSTAND SECTION 5 IN DETAIL

  14. Thank you very much! Any Question?

More Related