1 / 18

ELIS PLZEŇ a. s. PRODUCTS

ELIS PLZEŇ a. s. PRODUCTS. ELECTRO-MAGNETIC FLOW METERS. ELECTRO -MAGNETIC FLOW METERS. Intended for measurement of conductive liquids, mainly for clean and waste water, using in food and chemical industry Principal on Faraday law: u i = B x l x v [ μ V] Produced types : FLONET FN20XX .1

brandi
Download Presentation

ELIS PLZEŇ a. s. PRODUCTS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ELIS PLZEŇ a. s. PRODUCTS ELECTRO-MAGNETIC FLOW METERS ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  2. ELECTRO-MAGNETIC FLOW METERS • Intended for measurement of conductive liquids, mainly for clean and waste water, using in food and chemical industry • Principal on Faraday law: ui= B x l x v [μV] • Produced types: FLONET FN20XX.1 FLONET FF10XX.1 FLONET FH10XX • They don’t have any moving parts • They have min. pressure loses ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  3. ELECTRO-MAGNETIC FLOW METERS FLONET FN20XX.1 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  4. ELECTRO-MAGNETIC FLOW METERS FLONET FN20XX.1 • Produced sizes: DN6 to DN1200 (1/4” to 48”) • Nominal pressure: from 6 to 40 bar / 150 to 600lb • Min. conductivity of measured liquid: 20μS/cm, 5 μS/cm on special request • Max. temperature of measured liquid: up to +150°C (302°F) • Material of electrodes: ss-steel 316Ti, Hasteloy, Tantalum, Titanium, Platinum • Material of lining: Hard/Soft rubber, special rubber WAGUNIT,Teflon • Material of flanges: carbon steel, ss-steel • Type of connection: flanged or wafer (up to DN200) ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  5. ELECTRO-MAGNETIC FLOW METERS FLONETFN20XX.1 • Type of flanges: EN, ANSI, AWWA, JIS, AS, BS • Design version: compact, remote (max. 50m of length of cable) • Measurement accuracy:±0,5% in range 1:20, ±0,2% in range 1:10 • Measuring range: 0.1 to 10 m/s • Outputs: pulse, frequency, current 0(4) to 20mA, USB and RS485 • Power supply: 115/230V AC, 50/60Hz, 24VDC • Ambient temperature: -5° to +55°C (23° to 131°F) • Protection class: IP65/ IP67/IP68 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  6. ELECTRO-MAGNETIC FLOW METERS FLONET FN20XX.1 Rated internal diameter a sensor length ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  7. ELECTRO-MAGNETIC FLOW METERS FLONET FN20XX.1 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  8. ELECTRO-MAGNETIC FLOW METERS FLONET FF10XX.1 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  9. ELECTRO-MAGNETIC FLOW METERS FLONETFF10XX.1 • Produced sizes: DN10 to DN100 / 1/2” to 4” (Clamp) • Nominal pressure: 10bar / 150lb • Min. conductivity of measured liquid: 20μS/cm, 5 μS/cm on special request • Max. temperature of measured liquid: up to +150°C (302°F) • Material of electrodes: Hasteloy, Tantalum, Titanium, Platinum • Material of lining: Teflon • Material of flanges: carbon steel, ss-steel • Type of connection: Tri Clover (ASME BPE), DIN 11851 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  10. ELECTRO-MAGNETIC FLOW METERS FLONET FF10XX.1 • Design version: compact, remote (max. 50m of length ofcable) • Measurement accuracy:±0,5% in range 1:20 • Measuring range: 0.1 to 10 m/s • Outputs: pulse, frequency, current 0(4) to 20mA, USB and RS485 • Power supply: 115/230V AC, 50/60Hz, 24VDC • Ambient temperature: -5 to +55°C (23° to 131°F) • Protection class: IP65/ IP67/IP68 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  11. ELECTRO-MAGNETIC FLOW METERS FLONET FF10XX.1 Rated internal diameter a sensor length ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  12. ELECTRO-MAGNETIC FLOW METERS FLONET FF10XX.1 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  13. ELECTRO-MAGNETIC FLOW METERS FLONET FH10XX ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  14. ELECTRO-MAGNETIC FLOW METERS FLONET FH10XX • Produced sizes: DN6 to DN400 (1/4” to 16”) • Nominal pressure: from 6 to 40bar / 150 to 600lb • Min. conductivity of measured liquid: 20μS/cm, 5 μS/cm on special request • Max. temperature of measured liquid: up to +150°C (302°F) • Material of electrodes: ss-steel 316Ti, Hasteloy, Tantalum, Titanium, Platinum • Material of lining: Hard/Soft rubber, special rubber WAGUNIT, Teflon • Material of flanges: carbon steel, ss-steel • Type of connection: flanged or wafer (up to DN200) ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  15. ELECTRO-MAGNETIC FLOW METERS FLONET FH10XX • Type of flanges: EN, ANSI, AWWA, JIS, AS, BS • Design version:compact, remote (max. 50m oflength of cable) • Measurement accuracy:±0,5% in range 1:20 • Measuring range: 0.1 to 10 m/s • Outputs: pulse, current 0(4) to 20mA (HART) • Power supply: 115/230V AC, 50/60Hz, 24VDC • Ambient temperature: +5 to +55°C(23° to 131°F) • Protection class: IP67/IP68 ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  16. ELECTRO-MAGNETIC FLOW METERS FLONET FH10XX Rated internal diameter a sensor length ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  17. ELECTRO-MAGNETIC FLOW METERS FLONET FH10XX ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

  18. Thank you for your attention ELIS PLZEŇ a. s. Luční 15 301 64 Plzeň Czech Republic Phone: +420 377 517 751 Fax: +420 377 517 722 E-mail: sales@elis.cz http://www.elis.cz ELIS PLZEŇ a. s., Luční 15, 301 64 Plzeň, Czech Republic

More Related