1 / 7

AN-50(e) PMP v3.0 Configuration Notes

AN-50(e) PMP v3.0 Configuration Notes. VLAN capable switch. Dept 1. AN-50. Dept 2. SS1. SW1. Site 1. Site 3. Router. AN-50. VLAN capable switch. SC. Dept 2. AN-50. SS2. Dept 1. SW2. Site 2. Link-Group-Connection - I. Connection. Link. Group. Create Connection.

breanna-leach
Download Presentation

AN-50(e) PMP v3.0 Configuration Notes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AN-50(e) PMP v3.0 Configuration Notes

  2. VLAN capable switch Dept 1 AN-50 Dept 2 SS1 SW1 Site 1 Site 3 Router AN-50 VLAN capable switch SC Dept 2 AN-50 SS2 Dept 1 SW2 Site 2 Link-Group-Connection - I Connection Link Group Create Connection Create Link Create Group RedlineConfidential

  3. Link-Group-Connection - II • Link – wireless link • Wireless path between one SC and one SS • SS MAC address • DL burst rate, UL burst rate • Group – logical, multicast domain • Made up of SS connections assigned to the group • How packets of this group gets treated at SC Ethernet port • Tagged or untagged at SC • What QoS level is assigned for the group’s multicast traffic • Connection – logical user data flow between SC and SS • A connection belongs to a group and a link • What QoS level is assigned to this connection • How packets of this connection are treated at SS Ethernet port • Tagged or untagged at SS RedlineConfidential

  4. V3.0 configuration notes • Max # of SS’s per sector is 20 • Max # of groups per sector is 30 • Max # of connections (VIDs) per link is 12 • Max # of MAC addresses per group is 4000 • Max # of IDs (link, group, connection) per sector is 1000 • Each connection (VID) must belong to one group and one group only • Each connection (VID) must belong to one link and one link only • Each group can have only one connection (VID) at a subscriber or section controller • A pass-through group is used to pass “untagged packets” and “tagged, but undefined” packets • There can be only one pass-through group at a SC • There can be only one pass-through connection at a SS • QoS setting – see separate doc for details RedlineConfidential

  5. 802.1p priority setting - I • Default priority 802.1p bits are used only for tagged egress packets from a pass-through ingress port AN-50 AN-50 Tagged Pass-through SC SS Group Default 802.1p AN-50 AN-50 Tagged Pass-through SC SS Connection Default 802.1p RedlineConfidential

  6. 802.1p priority setting - II • Default priority value is ignored if packets are tagged on ingress port, in which case the .1p bits in the tag will be used at the egress port AN-50 AN-50 Tagged Tagged SC SS 802.1p bits 802.1p AN-50 AN-50 Tagged Tagged SC SS 802.1p bits 802.1p RedlineConfidential

  7. Useful references • VLAN Information • http://net21.ucdavis.edu/newvlan.htm • VLAN White paper - Avaya • http://www1.avaya.com/enterprise/whitepapers/vlan-tutorial.pdf • Tutorial on VLANs - CommsDesign • http://www.commsdesign.com/showArticle.jhtml?articleID=26806942 • IEEE 802.1Q Standard • http://standards.ieee.org/getieee802/download/802.1Q-1998.pdf • AN-50e User Manual • AN-50e PMP Quick Configuration Guide RedlineConfidential

More Related