1 / 15

Energy Efficient Video Transmission using Cooperation of WLAN and LTE networks

Energy Efficient Video Transmission using Cooperation of WLAN and LTE networks. Maryam Hamidirad mhamdirad@sfu.ca CMPT 820. Outine. Introduction Power Counting Mechanism Proposed Algorithm Results Conclusion Future Work. Introduction. Multimedia Broadcast/Multicast Service (MBMS)

brooke-stafford
Download Presentation

Energy Efficient Video Transmission using Cooperation of WLAN and LTE networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Energy Efficient Video Transmission using Cooperation of WLAN and LTE networks MaryamHamidirad mhamdirad@sfu.ca CMPT 820

  2. Outine • Introduction • Power Counting Mechanism • Proposed Algorithm • Results • Conclusion • Future Work

  3. Introduction • Multimedia Broadcast/Multicast Service (MBMS) • It provides an efficient way to broadcast data to multiple users in cellular networks • It has been realized by third generation partnership project (3GPP)

  4. Introduction(cntd.) • MBMS has two modes • Point to Point (PTP) • one DCH established for each UE in the Cell • Point to Multipoint (PTM) • one FACH covering the whole Cell and shared by all the UEs within

  5. Introduction(cntd.) PtP mode using DCH PtM mode using FACH

  6. Power Counting Mechanism • Parameters retrieval • Distance to base station • Number of users • QOS requirements • Power level computation for FACH and DCH • Transport channel with minimum power selected • Check parameters to adapt to system dynamics

  7. Proposed Algorithm • Define ten ranges for each cell • For each range compute the power needed to cover the range using FACH • Cluster remaining nodes • Compute the power to send to cluster heads • Find the minimum power of all ranges

  8. Proposed Algorithm (cntd.) • Cluster nodes based on • : Distance of the node to base station  • : Number of nodes lying in the transmission range of the node • :The extent to which the cluster head lays in the same range related to other cluster heads.

  9. Proposed Solution (cntd.)

  10. Results • We have run power counting mechanism and our clustering algorithm • Using MATLAB as a simulation tool • Varying users population of 20 to 200 with uniform distribution • Both scenarios has been tested 1000 times • Run clustering algorithm for varying weights changing 0.1 each time

  11. Results • For user population more than 30 , clustering algorithm will outperform current power counting mechanism as much as 20% • Increases the threshold to switch to FACHonly mode which uses high power • Current Power Counting Mechanism is 60 • Using Clustering algorithm is 140

  12. Results (cntd.)

  13. Conclusion • We have proposed clustering algorithm based on parameters that consider base station power • Clustering decreases the number of users that should receive MBMS from base station • Cooperation of WLAN and LTE improves base station power saving as much as 20%.

  14. Future Work • Using more power for user population less than 30 is an unresolved issue. • Using different users distribution like Gaussian to test the results. • Switching cluster heads periodically to guarantee the fairness of our approach • Using NS-3 as a network simulator to verify the results we get using MATLAB

  15. Thank You

More Related