1 / 6

Old style ORP and pH sensors.

Old style ORP and pH sensors. The exposed red sensor is an ORP sensor. This connecter predates the connector to the right which includes a PVC sleeve and an o-ring sealed retainer nut. Remove existing fittings for old style sensors. Remove old compression fitting. New Sensor Hardware .

bryant
Download Presentation

Old style ORP and pH sensors.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Old style ORP and pH sensors. The exposed red sensor is an ORP sensor. This connecter predates the connector to the right which includes a PVC sleeve and an o-ring sealed retainer nut.

  2. Remove existing fittings for old style sensors

  3. Remove old compression fitting

  4. New Sensor Hardware Install the new PVC sleeve into existing ¾” tee.

  5. New Sensor Slide the new sensor into the sleeve and turn it clock-wise until tight.

  6. New Cables Connect the new style cables to the new sensor (s). Connect the open ended tinned leads into the controller as required.

More Related