1 / 10

Verifying the Firmware Version on the MX/MXa/QX Actuator

Verifying the Firmware Version on the MX/MXa/QX Actuator. Digital and Analog Controls Group Flowserve FCD Lynchburg, VA. Firmware. Tells the actuator how to operate WINDOWS for the actuator Essential information when addressing customer problems. Firmware Upgrades.

brynne-kaufman
Download Presentation

Verifying the Firmware Version on the MX/MXa/QX Actuator

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Verifying the Firmware Version on the MX/MXa/QX Actuator Digital and Analog Controls Group Flowserve FCD Lynchburg, VA

  2. Firmware • Tells the actuator how to operate • WINDOWS for the actuator • Essential information when addressing customer problems

  3. Firmware Upgrades • Address functional deficiencies not found during initial testing • ESD • Modulation • CRC • Enhances the feature functionality of the actuator • Option board functionality • Comm Loss in Network Options • MXa SSMR

  4. Verifying the Firmware Version • Enter the SETUP Menu • Enter the DIAGNOSTIC Menu • Enter the IDENTIFICATION Sub-menu • Toggle through the options to the Firmware Version

  5. Firmware Verification Procedure Enter the SETUP Menu Toggle the REMOTE/STOP/LOCAL knob from STOP to REMOTE to LOCAL and back to STOP. Toggle the OPEN/CLOSE knob to OPEN, then CLOSE and then to OPEN

  6. Firmware Verification Procedure Enter the DIAGNOSTICS Menu “YES” “YES” “NO” “NO”

  7. Firmware Verification Procedure Enter the identification Sub-Menu MX “YES” “NO” MXa

  8. Firmware Verification Procedure Enter the IDENTIFICATION Sub-Menu MX “NO” “NO” “NO” “NO” “NO” MXa

  9. Firmware Verification Procedure Navigating the IDENTIFICATION Sub-Menu to find the Firmware version “YES” “YES” “YES” “YES” When the firmware version has been verified, cycle the REMOTE/STOP/LOCAL knob to either LOCAL or REMOTE and then back to STOP to return to the normal display

  10. Seeking a Solution • When seeking a solution to a customer’s problem, collect the critical data • MX, MXa or QX • Firmware version • Options • Configuration parameters • Description of the problem • Actuator display

More Related