1 / 10

Carpentry and Joinery

Carpentry and Joinery. Workshop tools. General Chisels. There are many different types of chisels and each has a particular use. The handles of most chisels are made from ash, beech, box wood or plastic and a mallet (not a hammer) is normally used to apply force . General Chisels.

calum
Download Presentation

Carpentry and Joinery

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Carpentry and Joinery Workshop tools

  2. General Chisels • There are many different types of chisels and each has a particular use. • The handles of most chisels are made from ash, beech, box wood or plastic and a mallet (not a hammer) is normally used to apply force

  3. General Chisels • BEVEL edged chisels are slightly undercut making them easy to push into corners. They are normally used for finishing dovetail joints.FIRMER chisels have a blade with a rectangular cross-section. This means that they are stronger and can be used for tougher/heavier work. A PARING chisel is a longer, thinner chisel which can be pushed into long joints such as housing joints. It is used for cleaning up the joint and to make it an accurate fit.

  4. Mortise Chisels • Mortise chisels are used for ‘chopping out’ joints (chiselling away the waste wood • They are particularly useful for cutting mortise joints as they are strong enough to withstand heavy blows with a mallet

  5. Mortise Chisels • The handle is normally made of ash or beech with a steel hoop at the top to stop it splitting. It also has a strengthening piece called a ferrule

  6. Try Squares • The woodworkers try-square is composed of two main parts - the stock and the blade. The blade is made from hardened and tempered steel which makes is resistant to damage. The stock is usually made from rosewood although cheaper versions can be made from plastic or cheap woods.A brass face is added to the stock to ensure a straight edge.

  7. Mortise Gauge • The mortise gauge is a special type of marking gauge and it is used to mark wood so that a mortise can be cut into it The mortise is marked out using the mortise gauge although it must be set to the correct size of mortise chisel very carefully. A mortise chisel is then used to remove the waste wood.

  8. Tenon Saw • Back Saws/Tenon Saws get their name from the steel or brass back (labelled on the diagram). The heavy back gives the saw its weight which is useful when sawing wood

  9. Coping Saw • Coping saws are used for cutting a range of woods and are very useful for cutting unusual shapes or curves. • using a coping saw is a test of skill as it can be difficult to control and requires practice

  10. Materials • http://www.technologystudent.com/designpro/mboard1.htm

More Related