1 / 8

MQXFS4 Measurements

MQXFS4 Measurements. Salvador Ferradas Troitino (TE-MSC-MDT) Alejandro Carlon Zurita (TE-MSC-MDT) Jose Ferradas Troitino (TE-MSC-MDT) Michela Semeraro ( TE-MSC-LMF). 927-22/01/2018. MQXF Measurement review Outline. Measurements of short model-coils 1.1 Size 1.2 Asymmetry

carriew
Download Presentation

MQXFS4 Measurements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MQXFS4 Measurements Salvador Ferradas Troitino (TE-MSC-MDT) Alejandro Carlon Zurita (TE-MSC-MDT) Jose Ferradas Troitino (TE-MSC-MDT) Michela Semeraro (TE-MSC-LMF) 927-22/01/2018

  2. MQXF Measurement reviewOutline Measurements of short model-coils 1.1 Size 1.2 Asymmetry 1.3 Production plot Annexes: Distributions Metrology report

  3. Metrology report

  4. Metrology report

  5. boxplot draws points as outliers if they are greater than q3 + w × (q3 – q1) or less than q1 – w × (q3 – q1), where w is the maximum whisker length, and q1 and q3 are the 25th and 75th percentiles of the sample data, respectively.1.5 (default) times the interquartile range. | positive numeric value The default value for 'Whisker' corresponds to approximately +/–2.7σ and 99.3 percent coverage if the data are normally distributed. The plotted whisker extends to the adjacent value, which is the most extreme data value that is not an outlier1 Metrologyreport 1https://ch.mathworks.com/help/stats/boxplot.html

  6. MQXF MEASUREMENTS REVIEW Annexe 1: Distribution Metrology report

  7. RIGHT LEFT step=0.0025; Coil 110; Metrologyreport

  8. Thanks for your attention, Metrology report

More Related