1 / 32

4.9.1 JEDEC MOISTURE SENSITIVITY UPDATE

4.9.1 JEDEC MOISTURE SENSITIVITY UPDATE. STEVE MARTELL (Sonoscan). J-STD-033C Published February 2012 J-STD-075 Published August 2008 Request to remove connectors (per EIA) J-STD-020D.1 Published August 2007 Typos corrected 3/08 (Rev D.1) Draft of 020C in process

cayenne
Download Presentation

4.9.1 JEDEC MOISTURE SENSITIVITY UPDATE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 4.9.1 JEDEC MOISTURE SENSITIVITY UPDATE STEVE MARTELL (Sonoscan)

  2. J-STD-033C Published February 2012 J-STD-075 Published August 2008 Request to remove connectors (per EIA) J-STD-020D.1 Published August 2007 Typos corrected 3/08 (Rev D.1) Draft of 020C in process Future Topics to be Considered Outline

  3. J-STD-033C Published Feb 2012

  4. J-STD-033C Published Feb 2012Summary of Changes

  5. J-STD-033C Published Feb 2012Summary of Changes (cont’d)

  6. J-STD-033C Published Feb 2012 Forward

  7. J-STD-033C Published Feb 2012 Purpose & Scope

  8. J-STD-033C Published Feb 2012 Desiccant Quantity Calculation

  9. J-STD-033C Published Feb 2012 Desiccant Handling & Storage

  10. J-STD-033C Published Feb 2012 HIC

  11. J-STD-033C Published Feb 2012 Caution Label

  12. J-STD-033C Published Feb 2012 Dry Pack Precautions

  13. J-STD-033C Published Feb 2012 Bake Temperature Tolerance

  14. J-STD-033C Published Feb 2012 Bake Temperature Tolerance

  15. J-STD-075

  16. J-STD-075 MSL & PSL

  17. J-STD-075 - Future • Changes known since original release of J-STD-075 • Remove from scope connectors and point to equivalent connector document • EIA-364-56E, Resistance to Soldering Heat Test Procedure for Electrical Connectors and Sockets • Move marking requirements to J-STD-033 • Other changes • Add preheat requirements to solder wave profile • 125C for 3 minutes (based on profiling from a few IBM cards) • Update tables 13-1 and 14-1 • Base wave and base reflow solder process exceptions • Improvements have been made across many commodities • Need to decide to either update values or remove values and only list commodity names

  18. J-STD-020D.1

  19. J-STD-020E Draft – June 2012

  20. J-STD-020E Draft – June 2012

  21. J-STD-020E Draft – June 2012

  22. J-STD-020E Draft – June 2012

  23. J-STD-020E Draft – June 2012

  24. J-STD-020E Draft – June 2012

  25. J-STD-020E Draft – June 2012

  26. J-STD-020E Draft – June 2012

  27. J-STD-020E Draft – June 2012

  28. J-STD-020E Draft – June 2012

  29. Future Topics for 033

  30. Future Topics for 075

  31. Future Topics for 020

  32. J-STDs 020 & 075 Draft of 020E in process Looking at potential future changes for 075A J-STD-033C Published February 2012 Other Future Considerations from JEITA ? J-STD-020 J-STD-033 J-STD-075 Summary

More Related