150 likes | 250 Views
RV10 - Riveting Manual. Dalia Margarita Gallaga 784420 Fernando Vargas Carmona 506099 Víctor Ángeles Pérez 610252. Getting Started. Remove Thin Film Smothing Edges. Getting Started. Sanding Measuring . Getting Started. Drilling with Standard (inches).
E N D
RV10 - Riveting Manual Dalia Margarita Gallaga 784420 Fernando Vargas Carmona 506099 Víctor Ángeles Pérez 610252
Getting Started • Remove Thin Film • Smothing Edges
Getting Started • Sanding • Measuring
Getting Started • Drilling with Standard (inches) * To avoid sliding, slowly place the drill over the aluminum sheet and manually turn the reel so it creates a small notch. Do not use a striker pin.
Getting Started • Countersinking * Always Contersink clockwise
Clecos • The clecos should be placed starting from the middle and ending at the sides.
Getting started • Drilling with Aeronautical Standard ( Decimal )/Cleco
Getting Started • Dimpling • Using a mechanical piston • Using the Dimpling Clamp
Getting Started • Pneumatic Countersinking * Alternate procedure for dimpling in places in which this procedure is not the best option due to the sheet’s width.
Riveting * Choose specific die ** Not recommended X Not Applicable.