1 / 41

Ionization Detectors

Ionization Detectors. Basic operation Charged particle passes through a gas (argon, air, …) and ionizes it Electrons and ions are collected by the detector anode and cathode Often there is secondary ionization producing amplification. Ionization Detectors. Modes of operation

cheung
Download Presentation

Ionization Detectors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ionization Detectors • Basic operation • Charged particle passes through a gas (argon, air, …) and ionizes it • Electrons and ions are collected by the detector anode and cathode • Often there is secondary ionization producing amplification

  2. Ionization Detectors • Modes of operation • Ionization mode • Full charge collection but no amplification (gain=1) • Generally used for gamma exposure and large fluxes • Proportional mode • Ionization avalanche produces an amplified signal proportional to the original ionization (gain = 103—105) • Allows measurement of dE/dx • Limited proportional (streamer) mode • Secondary avalanches from strong photo-emission and space charge effects occur (gain = 1010) • Geiger-Muller mode • Massive photo-emission results in many avalanches along the wire resulting in a saturated signal

  3. Ionization Detectors

  4. Ionization • Ionization • Direct – p + X -> p + X+ + e- • Penning effect - Ne* + Ar -> Ne + Ar+ + e- • ntotal = nprimary + nsecondary

  5. Ionization • The number of primary e/ion pairs is Poisson distributed, being due to a small number of independent interactions • Total number of ions formed is

  6. Ionization air 33.97

  7. Ionization

  8. Charge Transfer and Recombination • Once ions and electrons are produced they undergo collisions as they diffuse/drift • These collisions can lead to recombination thus lessening the signal

  9. Diffusion • Random thermal motion causes the electrons and ions to move away from their point of creation (diffusion) • From kinetic theory

  10. Diffusion • Multiple collisions with gas atoms causes diffusion • The linear distribution of charges is Gaussian

  11. Drift • In the presence of an electric field E the electrons/ions are accelerated along the field lines towards the anode/cathode • Collisions with other gas atoms limits the maximum average (drift) velocity w

  12. Drift • A useful concept is mobility m • Drift velocity w = mE • For ions, w+ is linearly proportional to E/P (reduced E field) up to very high fields • That’s because the average energy of the ions doesn’t change very much between collisions • The ion mobilities are ~ constant at 1-1.5 cm2/Vs • The drift velocity of ions is small compared to the (randomly oriented) thermal velocity

  13. Drift • For ions in a gas mixture, a very efficient process of charge transfer takes place where all ions are removed except those with the lower ionization potential • Usually occurs in 100-1000 collisions

  14. Drift • Electrons in an electric field can substantially increase their energy between collisions with gas molecules • The drift velocity is given by the Townsend expression (F=ma) • Where t is the time between collisions, e is the energy, N is the number of molecules/V and n is the instantaneous velocity

  15. Drift

  16. Drift • Large range of drift velocities and diffusion constants

  17. Drift • Note that at high E fields the drift velocity is no longer proportional to E • That’s where the drift velocity becomes comparable to the thermal velocity • Some gases like Ar-CH4 (90:10) have a saturated drift velocity (i.e. doesn’t change with E) • This is good for drift chambers where the time of the electrons is measured

  18. Drift • Ar-CO2 is a common gas for proportional and drift chambers

  19. Drift • Electrons can be captured by O2 in the gas, neutralized by an ion, or absorbed by the walls

  20. Proportional Counter • Consider a parallel plate ionization chamber of 1 cm thickness • Fine for an x-ray beam of 106 photons this is fine • But for single particle detectors we need amplification!

  21. Proportional Counter • Close to the anode the E field is sufficiently high (some kV/cm) that the electrons gain sufficient energy to further ionize the gas • Number of electron-ion pairs exponentially increases

  22. Proportional Counter

  23. Proportional Counter • There are other ways to generate high electric fields • These are used in micropattern detectors (MSGC, MICROMEGAS, GEM) which give improved rate capability and position resolution

  24. Proportional Counter • Multiplication of ionization is described by the first Townsend coefficient a(E) • a(E) is determined by • Excitation and ionization electron cross sections in the gas • Represents the number of ion pairs produced / path length

  25. Proportional Counter • Values of first Townsend coefficient

  26. Proportional Counter • Values of first Townsend coefficient

  27. Proportional Counter • Electron-molecule collisions are quite complicated

  28. Avalanche Formation

  29. Signal Development • The time development of the signal in a proportional chamber is somewhat different than that in an ionization chamber • Multiplication usually takes place at a few wire radii from the anode (r=Na) • The motion of the electrons and ions in the applied field causes a change in the system energy and a capacitively induced signal dV

  30. Signal Development • Surprisingly, in a proportional counter, the signal due to the positive ions dominates because they move all the way to the cathode

  31. Signal Development • Considering only the ions

  32. Signal Development • The signal grows quickly so it’s not necessary to collect the entire signal • ~1/2 the signal is collected in ~1/1000 the time • Usually a differentiator is used

  33. Signal Development • The pulse is thus cut short by the RC differentiating circuit

  34. Gas • Operationally desire low working voltage and high gain • Avalanche multiplication occurs in noble gases at much lower fields than in complex molecules • Argon is plentiful and inexpensive • But the de-excitation of noble gases is via photon emission with energy greater than metal work function • 11.6 eV photon from Ar versus 7.7 eV for Cu • This leads to permanent discharge from de-excitation photons or electrons emitted at cathode walls

  35. Gas • Argon+X • X is a polyatomic (quencher) gas • CH4, CO2, CF4, isobutane, alcohols, … • Polyatomic gases have large number of non-radiating excited states that provide for the absorption of photons in a wide energy range • Even a small amount of X can completely change the operation of the chamber • Recall we stated that there exists a very efficient ion exchange mechanism that quickly removes all ions except those with the lowest ionization potential I

  36. Gas • Argon+X • Neutralization of the ions at the cathode can occur by dissociation or polymerization • Must flow gas • Be aware of possible polymerization on anode or cathode • Malter effect • Insulator buildup on cathode • Positive ion buildup on insulator • Electron extraction from cathode • Permanent discharge

  37. Gas • Polymerization on anodes

  38. Proportional Counters • Many different types of gas detectors have evolved from the proportional counter

  39. Drift • Ar-CO2 is a common gas for proportional and drift chambers

  40. Drift

  41. Proportional Counter

More Related