1 / 11

1940 Tacoma Narrows Bridge Collapse (see enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html)

1940 Tacoma Narrows Bridge Collapse (see www.enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html). w n (= ) is the natural frequency , which equals for a RLC circuit and for a spring-mass-damper system. =. (. a. /. 2. a. a. ). 1. 0. 2.

chibale
Download Presentation

1940 Tacoma Narrows Bridge Collapse (see enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 1940 Tacoma Narrows Bridge Collapse (see www.enm.bris.ac.uk/research/nonlinear/tacoma/tacoma.html)

  2. wn (= ) is the natural frequency, which equals • for a RLC circuit and for a spring-mass-damper • system. = ( a / 2 a a ) 1 0 2 Second-Order System Dynamic Response • The general expression for a 2nd-order system is • This is a linear 2nd-order ODE, which can be rearranged as • z is the damping ratio, which equals • for a RLC circuit and for a spring-mass-damper • system.

  3. = Solutions to the ODE with Step-Input Forcing • For step-input forcing, there are 3 specific solutions of the ODE because there are 3 different roots of the characteristic equation (see Appendix I).

  4. The two initial conditions used are and y(0)=0. • The solution is of the form where and with

  5. The two initial conditions used are and y(0)=0. • The solution is of the form where and with OR with

  6. Underdamped Case (z < 1 ) The solution is Eqn. 5.57:

  7. Critically Damped Case (z = 1 ) The solution is Eqn. 5.59:

  8. Overdamped Case (z > 1 ) The solution is Eqn. 5.60:

  9. Step-Input Forcing Terminology wd ringing frequency Figure 5.7

  10. Sinusoidal-Input Forcing • For sinusoidal-input forcing, the solution typically is recast into expressions for M(w) and f(w) (see Eqns. 5.62-5.64 and Appendix I). Figures 5.9 and 5.10

  11. In-Class Example • Consider the RLC circuit (R = 2 W; C = 0.5 F; L = 0.5 H).

More Related