1 / 10

MAD

MAD. 資工三 A 4980E008 劉建宏. 編輯設定批次檔 ( 自設檔名 :baschrc_glibc_v1) 下達 指令 “ gedit baschrc_glibc_v1 ”. – 驗證工具鍊的路徑是否正確. 解壓縮下載檔案 – 輸入“ tar xvf libmad-0.15.1b.tar.gz” 解壓縮產生目 錄” libmad-0.15.1b”. 進入目錄” libmad-0.15.1b”, 編輯 “ config.sub”. 插入” nds32le”.

ciara
Download Presentation

MAD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MAD 資工三A 4980E008 劉建宏

  2. 編輯設定批次檔(自設檔名:baschrc_glibc_v1)下達指令 “gedit baschrc_glibc_v1”

  3. – 驗證工具鍊的路徑是否正確

  4. 解壓縮下載檔案– 輸入“tar xvf libmad-0.15.1b.tar.gz” 解壓縮產生目錄” libmad-0.15.1b”

  5. 進入目錄” libmad-0.15.1b”, 編輯 “config.sub”

  6. 插入”nds32le”

  7. 輸入” ./configure --host=nds32le-linux CXX=nds32lelinux-g++ --prefix=/usr/local/mad”產生Makefile等

  8. 輸入“make”進行編譯

  9. 輸入” sudoPATH=/usr/Andestech/AndeSight14/toolchains/nds32le-linux-glibc-V0/bin:$PATH make install” 進行安裝, 安裝前系統要求輸入使用者密碼

  10. 安裝在/usr/local/mad

More Related