1 / 3

MILK PLATE PASTEURIZER

MILK PLATE PASTEURIZER. MILK PLATE PASTEURIZER Milk pasteurizer for instance the following thermal cycle 4-75-4 or other, in relation with the product to handle. The plant will be composed as follow: *Buffer tank for milk m ade in AISI 304 stainless steel, with the following characteristics:

ciara
Download Presentation

MILK PLATE PASTEURIZER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MILK PLATE PASTEURIZER

  2. MILK PLATE PASTEURIZER • Milk pasteurizer for instance the following thermal cycle 4-75-4 or other, in relation with the product to handle. • The plant will be composed as follow: • *Buffer tank for milk made in AISI 304 stainless steel, with the following characteristics: • - AISI 304 stainless steel tank, with glazed and pickled inside and outside surface • - Pickled, flattened, grounded and spotted welding • - Conical bottom with total exhaust valve • - Plate cover with CIP (cleaning in place) devices. • - Total discharging piping, manufactured in stainless steel • - Glass level rod, with stainless steel protection. • - level sensor to stop /start the pump • three legs supporting structure manufactured in stainless steel • *Milk centrifugal pump with sanitary close impeller manufactured in stainless steel AISI 304, connection DN 25. • *Plate pasteurizer designed for the treatment milk. Thermal cycle 4-75-4°C or different if it is necessary. The pasteurization section is composed of an heating section from 4°C to 50°C using product in counter flow, a pasteurisation section from 50 to 75 with hot water at 90°C, a precooling product section from 75 to 30°C with product in counterflow (heating recovery system) and a cooling section from 30 to 4°C with ice cold water at +2°C. The exchanger is composed of: • -plates in stainless steel AISI 316 and nitrile alimentary rubber joints • -intermediate plates in stainless steel AISI 304 • -frame in stainless steel AISI 304 with closing lateral tie rod • -pipe connections for various fluids in stainless steel • -thermal holding system with multiple pipes. The pipes are connected in serial with detachable turns and mounted on a supporting frame in stainless steel. • hot water at 90°C adjustable group formed by an heat exchanger pump, an expansion tank pipes automatic temperature control • steam group formed by a manual valve, pneumatic valve, steam filter and condensate discarging group • -chilled water at +2°C adjustable group formed by a pneumatic valve, pipes, and manual valve and chiller

  3. -Instruments to record the pasteurising and the exit temperature • -System to adjust the thermal fluid temperatures • -3 ways valve to divert the product in case of low temperature • Necessary electro pneumatical transducers • -PT 100 probes for temperature measurements • - Air reducing equipment for compressed air • *Electrical control board including: electronic temperature regulator with PID control, main circuit breaker, work/ wash selector switch, pump selector switches TECMON S.R.L. P.IVA 00791710965 VIA LEONARDO DA VINCI, 11/B COD.FISC. 04821200153 20060 CASSINA DE’ PECCHI (MI) TEL. +39 0295299106 CAP. SOC. € 83.000,00 INT. VERS. FAX +39 0295299315 ISCR. TRIB. DI MONZA REG. SOC. 17929 E-MAIL : tecmon@tin.it C.C.I.A.A. MONZA E BRIANZA 1041916 E-MAIL : info@tecmon.it http:// www.tecmon.it

More Related