1 / 25

CAD designed MAX OAH = 92” MAX OAL = 252”

CAD designed MAX OAH = 92” MAX OAL = 252”. FORD F550 CHASSIS. 17,500 GVW 2 and 4 door versions 7.3 Power stroke Diesel Automatic transmission. BED & BODY. Aluminum 6061 T-6 Alloy 112” body length HD under body support grid 2”× 4” Box tubing sub- structure (.250 wall)

cicada
Download Presentation

CAD designed MAX OAH = 92” MAX OAL = 252”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CAD designed • MAX OAH = 92” • MAX OAL = 252” FORD F550 CHASSIS • 17,500 GVW • 2 and 4 door versions • 7.3 Power stroke Diesel • Automatic transmission

  2. BED & BODY • Aluminum 6061 T-6 Alloy • 112” body length • HD under body support grid • 2”× 4” Box tubing sub- structure (.250 wall) • 6”× 4” angle perimeter with tapered fronts • 2 widths available (dually or super single)

  3. CAGE • .200 × 1.900 5086 tubing • 5 part break-a-part design • Jig built for ease of replacement • Allows top removal of tank Protective Mesh plating • 5/16” 5052 aluminum plate • Custom diamond stamped design

  4. WATER TANK • Poly material • Life time warranty • 400 gallons standard • 44” wide × 64” long × 38” height • Fill tower • #70 durometer rubber isolation plate • 3 × 3 ¼ aluminum angle welded onto deck

  5. PUMP • Waterous E-501-A standard • 26.5 HP diesel • 350 PSI @ 40 GPM • 150 PSI @ 100 GPM • Separate 40 amp alternator • 2” main inlet • 1.5” main outlet • 2.5” inlet valve • Other Waterous or Hale pumps available

  6. PLUMBING • 2” tank to pump with ¼ turn valve • Stainless steel discharge manifold (304-L) • Straight shot lockable linkage • Elkhart controls • 2.5” inlet valve

  7. BOOSTER REELS Standard • (2) Hannay #SBEF32-23-24 • Each with 200’ of ¾” booster • (4) 100’ lengths hose • Hose coupled bar way NST Optional • Protection reels • 50” of ¾” booster • 3 locations: upper, lower, or under bed (AS SHOWN)

  8. HOSE TRAY • (1) 200’ bed of 1.75 pre connect • Left or right rear side of bed

  9. COMPARTMENTS • 40” long × 18” deep × 36” high • Aluminum construction • ¾” OAK tool mounting wall • Compartment lights • (1) adjustable shelf • Magnetic door switches (for cab door open light) • Roll-up door (brushed aluminum)

  10. REAR STEP BUMPER • Plus 20 degree departure angle • Steel substructure • 4-way NFPA slip resistant cover • Lighted recessed license plate • Step lights • Winch power (optional) • Seven pin connector (optional) • Protected FMVSS lighting modules

  11. WINCH • 2 – 12 volt night lights • 95’ of 5/16 cable • Remote control coil cord • WARN XI 8000 • Storage options • 2 – 12 volt plugs

  12. WIRING CENTER • Weather proof aluminum construction • 3003 smooth aluminum powder coated • Separate service door • Chassis key energized system • Key becomes master switch

  13. LIGHTING • Whelen “B” link multiplex system • Light protected by Brush guard • Grille lights • Bumper lights • Winch lights • Rear warning (LED) • FMVSS rear lower • Scene lights (3) 12 volt

  14. PUMP PANEL • .125 Aluminum powder coating • Lettered control bezels • Pump control and gauges • “T” handle control handles (locking) • Water level gauge • Optional foam level gauge

  15. SHORELINE • 110 volt Kussmaul auto eject • 110 volt Kussmaul on board charger

  16. UNDERBODY SKID PLATES • Below the oil pan • Under front axle hub • Auto trans • Fuel tank • All painted (X-O rust) black

  17. FOAM SYSTEM • Foam pro 1600 • Controls on pump panel • Class A foam .1 to 1% • 15 gallon foam cell Optional • CAFS • Dual agent system

  18. FRONT BUMPER • Plus 20 degree approach angle • Alluminum or steel construction • 12” channel • 4” × 4” × ¼” tube substructure • Recessed class 3 hitch and pull points

  19. BRUSH GUARD(S) • 2.00 × 1.900 5086 tubing • Nerf bar / running boards • Lightbar guard

  20. Custom offset 19.5” wheels ½” solid centers SAE 267 certified (cornering and radial) Wheels painted as standard (match body) Optional jet coat wheels Michelin load range H 285 70R / 19.5 D2 tires 6100 lb rating per tire 105 PSI inflation pressure Mud and snow tread WHEELS AND TIRES Wheels Tires

  21. CUSTOM CONSOLES • All aluminum construction • Powder coated • Diagnostic cabinet • Custom designs available

  22. GRAPHICS • Standard equipped with 4” NFPA stripe • Optional based on fire district needs • Gold leaf • Scotchlite • Custom logos

  23. OTHER OPTIONS • Bumper turrets (remote joy stick control) • Tank top storage (up to 8’ available) • Bumper spray nozzles • Air systems: breathing, tool, tire fill • Seven pin connectors • 120 volt lighting

  24. OTHER OPTIONS • Water cooler with mounts • Tool storage • Generators • Additional compartments • Mud flaps

More Related