1 / 10

Pulse Width Modulation

Pulse Width Modulation. Professor: Dr. Miguel Alonso Jr. Outline. Principle Types Transmission Bandwidth Technique for Generation Other Applications Schematics of the project PWM circuit (foundation for group projects). Principle.

coby-riley
Download Presentation

Pulse Width Modulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pulse Width Modulation Professor: Dr. Miguel Alonso Jr.

  2. Outline • Principle • Types • Transmission Bandwidth • Technique for Generation • Other Applications • Schematics of the project PWM circuit (foundation for group projects)

  3. Principle • Pulse width modulation uses a square wave and varies the duty cycle to convey the information • The duty cycle is directly proportional to the amplitude of the message signal

  4. Types • Three types of pulse-width modulation (PWM) are possible. • The pulse center may be fixed in the center of the time window and both edges of the pulse moved to compress or expand the width • The lead edge can be held at the lead edge of the window and the tail edge modulated. • The tail edge can be fixed and the lead edge modulated

  5. Transmission Bandwidth • Much more complex than PAM tranmission bandwidth • Recall BT = K1/τ • This is a course approximation • A fine approximation is needed for PWM • BT = 0.5/trise

  6. Example • A Baseband signal with a bandwidth of 10kHz is to be sampled and converted into a PWM signal. Rise time cannot exceed 1% of the sampling time interval. Determine the approximate transmission bandwidth. Assume the minimum Nyquist sampling rate.

  7. Techniques for Generation • Intersective • Digital (using a microcontroller and a counter to count the pulse width) • In intersective generation of a PWM, the message signal is compared to a sawtooth waveform. • When the message signal is greater than the sawtooth, the out goes high, otherwise, it goes low

  8. Other Applications • Telecommunications – the width of the pulse can correspond to specific data values encoded at the transmitter ( we will talk about encoding schemes later on) • Motor Control – the average power delivered to the motor is proportional to the pulse width

  9. Schematics for PWM circuit

More Related