1 / 23

Room Acoustics

Room Acoustics. Reverberation. Reverberation. direct sound. reflected sounds. Sustained sound. Reverberation time = time it takes for loudness decrease by 60 dB. Acoustics characteristics of auditoriums. “liveness” : reverberation time

colm
Download Presentation

Room Acoustics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Room Acoustics

  2. Reverberation

  3. Reverberation direct sound reflected sounds

  4. Sustained sound Reverberation time = time it takes for loudness decrease by 60 dB

  5. Acoustics characteristics of auditoriums “liveness” : reverberation time “intimacy”: time to the first reflected sound to arrive “fullness/clarity”: direct sound versus reflected sound volume “warmth/brilliance”: reverberation time for low frequencies larger/smaller than for high frequencies

  6. “texture”: temporal pattern of reflections good bad “blend”: all seats hear all instruments “ensemble”: musicians can hear themselves

  7. Problems in acoustic design Focusing

  8. Problems in acoustic design Focusing

  9. Echoes “pessimal” design reflecting wall stage audience

  10. Shadows only low frequencies behind the overhang

  11. Resonances analogy vocal chords instruments formants room resonances

  12. We want lots of resonances, evenly spread in the frequency (no favored frequencies) 10.89-ft high, 12.4-ft wide, and 15.14 ft long 8-ft high, 16-ft wide, and 16 ft long

  13. Walt Disney Hall (LA Philharmonic)

  14. Precedence effect ALL the sound seems to come from the direction of the earliest sound Electronic enhancement has to be delayed by 20-50 ms

  15. External noise Solution: shielding, shielding, shielding ! Acceptable noise Recording studio 25dB Auditoriums, classrooms 30dB Homes 40dB Restaurants 50db (!)

  16. Calculation of reverberation time (engineer style) volume (ft3) absorption (ft2) reverberation time (s) A is the sum over all absorbing surfaces

  17. Example: 13ft by 20ft by 8ft room 4 walls of plaster (absorption coefficient 0.1) carpet floor (absorption coefficient 0.3) absorptive tile ceiling (absorption coefficient 0.6) walls floor ceiling

  18. volume • Warning: • The aborption coefficient depends on the frequency • people absorb sound: 1 person = 2.5 sabins • person + upholstered seat = 3 sabins

  19. Trial and error leads to rules of thumb (RPG Diffusor Systems INC) “The ceiling of an Auditorium should be primarily sound reflected/diffusive (not primarily absorptive) in order to reflect early energy down to the audience promoting loudness and intelligibility. The ceiling should be 30%-50% open to the space above to vent excessive sound power and/or promote reverberance. It is important that the ceiling surfaces be sound diffusive so that gaps in the sound distribution pattern (nonuniformity) do not result from the open areas. Lower side and rear walls near the audience should also be reflective/diffusive (not absorptive) to promote loudness, intelligibility, envelopment, and to prevent echoes off the rear wall. Overall reverberance and loudness is controlled by placing absorption and diffsorption (mid frequency absorption and high frequency diffusion) on the underside of the roof deck and on the upper walls respectively. The amount of absorption and diffsorption depends on the overall volume of the auditorium. Larger auditoriums (350+ cubic feet per seat) require that approximately 50% of the upper wall area be treated with diffsorption, while smaller auditoriums (250–350 cubic feet per seat) require only about 25% of the upper wall area be treated. Typically, small auditoriums with less than 250 cubic feet per seat are not reverberant enough for music and serve only as good speech rooms. Very little absorption is required in these rooms. Problems such as flutter and echoes are prevented with diffusion and diffsorption. “

  20. Avery Fisher Hall (Lincoln Center) clouds

More Related