1 / 20

Photoelectron Spectroscopy

Photoelectron Spectroscopy. Straightforward evidence for the validity of orbital diagram. Konsler 2013. Electron Configuration. Is there any direct evidence that this diagram is accurately showing potential energy of electrons on the atom?. Some Available Evidence. Atomic Emission Spectra

colum
Download Presentation

Photoelectron Spectroscopy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Photoelectron Spectroscopy Straightforward evidence for the validity of orbital diagram Konsler 2013

  2. Electron Configuration Is there any direct evidence that this diagram is accurately showing potential energy of electrons on the atom?

  3. Some Available Evidence • Atomic Emission Spectra • Successive Ionization • Photoelectron Spectroscopy The topic is probably best introduced in1st year Chemistry under Atomic Electronic Structure

  4. Atomic Emission Spectra Atomic emission spectra are evidence that there are specific allowed PE values by showing the energy difference between some of them.

  5. Limitations Differences between PE values, not the values themselves. Ambiguous origin and destination orbitals. Impossible to visually compare PE of orbitals on multiple atoms; large data sets will require many calculations.

  6. Successive Ionization Using successive ionization it is usually possible to determine the number of valence electrons an atom has. This is evidence that our PE diagram is an accurate representation

  7. Limitations Each ionization causes a reorganization of the remaining electrons, meaning the successive ionization is not a measurement of the characteristics of the original atom. We infer there is a relationship between the ions and the parent atom.

  8. Limitations It’s not feasible to do more than 5 successive ionizations, making core electrons (and sometimes even valence electrons) impossible to obtain values for.

  9. Limitations It’s not possible to determine if electrons at the same energy level on the atom have the same PE initially, because we remove them one at a time. As a result, the method is really a support only for n, not the other 3 quantum numbers.

  10. Each event happens once for a single atom. This is a quantum event. Since Ephoton > IEelectron for all the electrons on the atom, the electron removed is random and the KE of the electron is a characteristic of that electron as it exists on the atom at the moment of the event. Photoelectron Spectroscopy Atom Ephoton = hv KE = mv2 2 Monochromatic Beam of X-Rays e- IEelectron = Ephoton - KE

  11. Negatively Charged Hemisphere (Constant V) Retarding Voltage is directly proportional to KEelectron Independent Variable (x) Retarding Voltage of Lens Negatively Charged Hemisphere (Constant V) Dependent Variable (y) Intensity Beam of Atoms Electron Detector Electrons scan past detector Electrostatic Lens (Focuses and slows electrons) X-Rays (monochromatic) The intensity is measured as the retarding voltage on the lens is reduced at a constant rate Electrons ejected

  12. Photoelectron Spectroscopy is still limited by Ephoton. If IEelectron is too large, the electron will not be detected. This means that electrons with low values of n on atoms with high value of Z may be off the left hand side of the chart. High Ionization Energy Low electron PE Low Ionization Energy High electron PE 20 MJ/mol 10 MJ/mol 0 MJ/mol IEelectron= Ephoton - KEelectron

  13. However, a fluorescence source emits X-Rays with energy of over 1000 eV, several times greater than for successive ionization instrumentation. In addition, core electrons are removed from a neutral atom, requiring less energy. High Ionization Energy Low electron PE Low Ionization Energy High electron PE 20 MJ/mol 10 MJ/mol 0 MJ/mol IEelectron= Ephoton - KEelectron

  14. Photoelectron Spectrum Valence Helium possesses the valence electron with the lowest PE of all elements. The measured value for He is 2.37 MJ/mol. Any values observed with greater values (to the left of this line) must be core electrons. Note, d-subshell core electrons will be to the right of this line. 20 MJ/mol 10 MJ/mol 0 MJ/mol “Valence Line”: He(1s) = 2.37 MJ/mol

  15. Photoelectron Spectrum Since each event removes a random electron from a separate atom, the relative intensity shows the proportion of electrons at that PE. Relative Intensity = 2 Relative Intensity = 1 20 MJ/mol 10 MJ/mol 0 MJ/mol

  16. Photoelectron Spectrum Valence 19.3 MJ/mol 1.36 MJ/mol RI = 2 RI = 2 0.80 MJ/mol RI = 1 20 MJ/mol 10 MJ/mol 0 MJ/mol

  17. Photoelectron Spectrum Boron (Z=5) 19.3 MJ/mol 1.36 MJ/mol • Analysis: • Valence has 2 values: sp • RI is 2 to 1 in valence: s2p1 • Closest core has RI 2 not 6: not pxs2p1 • s2s2p1 must be 1s22s22p1 RI = 2 RI = 2 0.80 MJ/mol RI = 1 2s2 1s2 2p1 20 MJ/mol 10 MJ/mol 0 MJ/mol

  18. Photoelectron Spectrum 2p6 Sodium (Z=11) 3.67 MJ/mol 1s2 2s2 3s1 104 MJ/mol 6.84 MJ/mol 0.50 MJ/mol { } 8 MJ/mol 4 MJ/mol 0 MJ/mol

  19. But there aren’t even any instruments! • All PES spectra will probably be “simulated” for the following reasons: • PES post-dates atomic theory. • Most PES is a solid-phase technique. Having so many nearby atoms will cause interference. For example, an electron promoted out of a low lying orbital will leave a vacancy which can be occupied by an outer orbital electron with concomitant production of a photon. If that photon is of high enough energy, it might eject a more easily ionized electron in the same atom or a nearby atom. This will result in the production of background interference and even spurious peaks. As a result, PES spectra derived from solids would be impossible for a non-expert to interpret.

  20. Why do it? • Although it requires “simulated spectra” it is superior to other methods we describe in General Chemistry because, even in principle, atomic emission and successive ionization do not provide data which could be used to identify an atom in the context of an exam. At best they would allow a student to choose the most likely among a set of possibilities. • Photoelectron spectroscopy allows questions to be written using visual as opposed to tabular data (as is required for successive ionization). • Students can be asked to interpret a spectrum but they can also legitimately be asked to draw one. It’s a decently easy grade if you give the axes and requires essentially no “give away” information in the stimulus. • Therefore, while the instruments aren’t accessible, understanding the principle allows more thoughtful questions to be asked about electronic structure than were previously possible.

More Related