1 / 5

1- What is shielded arc welding? 2- What are some safety precautions for shielded arc welding?

Enterprise: Ag Mechanics Job: Arc Welding Objective: Learn to safely and effectively shielded arc weld. 1- What is shielded arc welding? 2- What are some safety precautions for shielded arc welding? 3- What are some procedures for striking an arc?

cora-briggs
Download Presentation

1- What is shielded arc welding? 2- What are some safety precautions for shielded arc welding?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Enterprise: Ag MechanicsJob: Arc WeldingObjective: Learn to safely and effectively shielded arc weld • 1- What is shielded arc welding? • 2- What are some safety precautions for shielded arc welding? • 3- What are some procedures for striking an arc? • 4- List some basic arc weld and positions. • 5- List the equipment needed for shielded arc welding. • 6- Draw some basic weave patterns used • in shielded arc welding…

  2. 7- What is an electrode? • 8- How should metal be prepared for welding? • 9- How is cutting accomplished? • 10- What determines amp setting? • 11- What determines rod size?…

  3. 1. Shielded arc welding is a fusion process where heat is obtained from an electric arc which is formed between a base metal and an electrode. • 2. Some safety precautions are: • A) Don't strike arc until helmet is in place • B) Wear proper clothing • C) Hold electrode by insulated handle • D) Proper ventilation • E) Avoid welding near combustible material • F) Always wear safety glasses • G) Never stand in water when welding • H) Never weld on closed containers • I) Yell “cover” before striking arc • 3. Hold the electrode at a 15 degrees travel angle and either tap or strike an arc then position electrode 1/8 inch from metal…

  4. 4. Some basic welds are Butt, Tee, Lap V, and positions are Flat, Horizontal, Vertical and Overhead. • 5. Some equipment is: • A) Grinder E) Chipping Hammer • B) Helmet F) Clothes • C) Vice G) Helmet • D) Wire Brush H) Pliers • 7. An electrode is a metal rod coated with Flux the numbers on the rod stand for 601 1 - • 60 = 60,000 lbs per square inch • XX 1 = Position 1 =All 2 = Flat and Horizontal 3 = Flat • XXX 1 = Polarity • 1,3,4,8=AC or DC Reverse 2 = AC or DC straight 0 = DC Reverse…

  5. 8. Metal should be cleaned of oil, paint, rust, and ground to bevel if over 1/4". • 9. Cutting is done by turning amps up 150% and pushing rod through metal. • 10. The amp setting is determined by the rod size and metal thickness • 11. The size of rod used is based on the thickness of metal…X

More Related