Can Refinished Bathtubs, Sinks and Showers Be Reglazed Again?

1. Can Refinished Bathtubs, Sinks and Showers Be Reglazed Again? Yes, the bathtub and fixtures can be reglazed again and again. If your bath has turned pale and worn out after some years of reglazing, then you can consider refinishing it twice. Reglazing is the best option if your tub is in good condition and just has some chips, stains, and cracks. Different types of tubs have different maintenance needs. It is generally believed that acrylic bathtubs should not be reglazed more than once, but it is not the issue, it can be refinished and reglazed too. If you are looking to pumping some life into their bathtubs, reglazing is the best thing to go. It is the best way to restore the vitality instead of going for messy replacements that add on to the cost. A professional reglazed lasts for about 10-15 years. The process of refinishing helps in protecting the integrity of your bathtub. Though, weekly maintenance is required to keep the tub away from stains and chips and to retain the glossy finish. Given proper care and maintenance, the bathtub is bound to last for good years. The reglazing accounts for cleaning the bathtub for the foreign material and then applying a coat of finishing paint. Yes, it sounds simple, but it isn’t. Improper cleaning

2. of the bathtub can result in uneven paint and can destroy the whole look of the bathtub. The process of reglazing involves: a) Clean the bathtub and remove caulking b) Remove or tape drain and fixtures c) Scraping the surface to make it even d) Smooth up the area by filling e) Clean the area and tape it with primer f) Apply 3 coats of primer and let it dry g) Refinishing coating with a roller h) Left to dry for at least 24 hours i) Remove the taping An adequately reglazed tub should be prevented from normal wear and tear from water. Water can seep in underneath the finish, loosening it further, so the peeling continues. If you happen to drop something heavy on the surface, then it could result in chips and cracks in your newly refinished bathtub. If the glaze is not allowed to dry up, it can lead to peeling of the surface. Sudden change in temperature from hot to cold can lead to peeling and chipping of the tub. If your tub has seen ten years of reglazing and refinishing, then normal wear and tear might be due to improper maintenance. Reglazing / Refinishing process needs to be performed by the experts to ensure durability and warranty over it. It can lead to getting the tub refinished or reglazed again after good years of serving.

3. To maintain a refinished bathtub, it is advisable to avoid abrasive cleaners and use mild soaps and cleaners. Abrasive cleaners like strong detergent strip off the good qualities and finish of the bathtub, and make it dull. It erases the protective layer over the bathtub and makes it prone to damage. You can use mild soap and baking soda for cleaning the bathtub. As the non-abrasive cleaners keep the tub protected for years to come. Thus, Reglazing is a much great pick then going for replacement as apart from being cost-effective, it helps in keeping the bathtub flawless for 10-12 years. The process might seem a bit overwhelming for the first-timers, but if done correctly, it lasts. Proper stripping of glaze adhesion requires scrubbing and working with harsh chemicals, which can be toxic. It is because of this, is advisable to hire the best Bathtub Reglazing Buffalo NY, which will help improve the life of your tub with a tag of warranty and durability.