60 likes | 182 Views
ScECAL Fermilab Beam Test analysis. ScECAL Group Meeting Kyungpook National University, Daegu, Republic of Korea, April 28 th , 2010 Adil Khan, Satoru Uozumi, DongHee Kim. Energy Spectrum with out Temperature Correction. # of counts. Energy Deposit in ScECAL (MIPS). Mean. Energy(GeV).
E N D
ScECAL Fermilab Beam Test analysis ScECAL Group MeetingKyungpook National University, Daegu, Republic of Korea,April 28th , 2010 Adil Khan, Satoru Uozumi, DongHee Kim
Energy Spectrum with out Temperature Correction # of counts Energy Deposit in ScECAL (MIPS) Mean Energy(GeV) Sig/E 1/sqrt(E)
Energy Spectrum with Temperature Correction # of counts Esum += (slope*Nominal Temp+offset) / (Slope*HM3Temp+offset)*En TNominal = 25C After using Temperature Correction Factor, the result is almost same, No significant difference. The quadratic function“Pol2” is used for fitting Energy Resolution. Energy Deposit in ScECAL (MIPS) Mean Energy(GeV) Sig/E 1/sqrt(E)
BACK UP Esum += (slope*Nominal Temp+offset) / (Slope*HM3Temp+offset)*En TNominal = 25C
ScECAL Temp Vs HcalM3temp 1 ScECALTemp(C) hCALM3Temp(C) Splitted into 4 parts , in order to make the Temp distribution for linear Fit 2 3 4
Mip Constant Vs Correlated Temp Temperature=P0* hCALM3 + P1 MipConst and Temperature Obtained Run by Run