1 / 25

The engineering equipment and systems for NICA

The engineering equipment and systems for NICA. International Workshop NICA-SPIN 2013 JINR, Dubna, Russia, March 17 - 19, 2013 March 18, Monday N.Topilin.

cyndi
Download Presentation

The engineering equipment and systems for NICA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The engineering equipment and systems for NICA International Workshop NICA-SPIN 2013 JINR, Dubna, Russia, March 17 - 19, 2013 March 18, Monday N.Topilin N.Topilin, JINR

  2. Гигиенические требования к организации технологических процессов,производственному оборудованию и рабочему инструментуСанитарно-эпидемиологические правилаСП 2.2.2.1327-03Дата введения: 25 июня 2003 г.1 N.Topilin, JINR

  3. Standard lifting tool N.Topilin, JINR

  4. Good floor – 50% of success N.Topilin, JINR

  5. Pneumatic tool (Genie Super Hoist) GH™-3.8 • 3.80 m lifting height • 136 kg load capacity GH-5.6 • 5.60 m lifting height • 113 kg load capacity Drill machine on magnetic base N.Topilin, JINR

  6. Booster tunnel cross-section N.Topilin, JINR

  7. Collider tunnel cross-section N.Topilin, JINR

  8. Controlled Tightening Tool N.Topilin, JINR

  9. Controlled Tightening Tool 1410 Nm N.Topilin, JINR

  10. Useful tool N.Topilin, JINR

  11. Heavy disk handling (Chamber f.e.) N.Topilin, JINR

  12. Manipulator • This Tool was used at CERN in 2002-2006 years during ATLAS Tilecal assembly • The great idea to use it for MPD magnet assembly and other similar objects : • The Chain speed is0.5 or 1.0 cm per sec N.Topilin, JINR

  13. Manipulator using examples N.Topilin, JINR

  14. MPD Magnet assembly with Manipulator N.Topilin, JINR

  15. MPD Hall plane N.Topilin, JINR

  16. MPD – Multi Purpose Detector– 1300 t 3 main variants of moving: 1 - Simple sliding, friction coefficient – 0.2; push/pull force = 260 t Normal surface hardness 2 –Rolling, friction coefficient – 0.05; push/pull force = 65 t High surface hardness 3 –Air pads, friction coefficient – 0.02; push/pull force = 26 t Normal surface hardness N.Topilin, JINR

  17. Heavy objects moving N.Topilin, JINR

  18. Heavy objects moving (cont) N.Topilin, JINR

  19. 900 t (1600 t) object moves on air pads N.Topilin, JINR

  20. Special lifting tool (with counterweight) N.Topilin, JINR

  21. Scaffolding N.Topilin, JINR

  22. Round ladders N.Topilin, JINR

  23. VBLHEP JINR Auto gate Roll way gate Private zone N.Topilin, JINR

  24. Dubna, VBLHEP JINR ? N.Topilin, JINR

  25. THANK YOU FOR YOUR ATTENTION!СПАСИБОЗА ВНИМАНИЕ! N.Topilin, JINR 25

More Related