1 / 31

Error Detection

Error Detection. Error Detection and Correction. Background Data can be corrupted during transmission For reliable communication, errors must be detected and corrected Error detection and correction can be implemented in Data link layer, or Transport layer. Types of Errors.

cynthiaperry
Download Presentation

Error Detection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Error Detection

  2. Error Detection and Correction • Background • Data can be corrupted during transmission • For reliable communication, errors must be detected and corrected • Error detection and correction can be implemented in • Data link layer, or • Transport layer

  3. Types of Errors

  4. Single-Bit Error • Only one bit in the data units has changed • Example sent received 00000100 00001100

  5. Burst Error • Two or more bits in the data unit have changed • Errors do not occur in consecutive bits • The length of the burst measured from the first corrupted bit to the last corrupted bit

  6. Burst Error • Example length of burst error 7 bits sent 0000110000110000110 received 0011110010110000110

  7. Detection : Redundancy • 1) Two copies of data unit (packet) are sent • Receiving device compares them • Able to detect errors • Transmission time  double • Computational time  slow

  8. Detection : Redundancy • 2) Only extra information is added • Shorter group of bits may be added to each packet • Used by the receiving device • Discarded when it is used

  9. Redundancy Check

  10. Redundancy Check • Four types of redundancy checks • Vertical redundancy check (VRC) • Longitudinal redundancy check (LRC) • Cyclical redundancy check (CRC) • Checksum

  11. Vertical Redundancy Check(VRC) • Implemented in the physical layer • Most common and least expensive mechanism for error detection • Also called parity bit check • A redundant bit, called parity bit, is appended to every data unit • The number of 1s for each data unit, including the parity bit, becomes even • 0 is appended when the data unit consists of even 1s

  12. VRC

  13. VRC Original Data • 1110111 1101111 1100100 Parity Bit added • 11101110 11011110 11001001 Received data 11111110 11011110 11001001 Discard this data

  14. VRC • Performance • Detects all single-bit errors (1, 3, 5, .. Bits changed) • Able to detect burst errors if • The total number of bits changed is odd • Cannot detect errors where the total number of bits changed is even

  15. Longitudinal Redundancy Check(LRC) 1110011111011101 00111001 10101001 11100111 11011101 00111001 10101001 10101010 LRC 1110011111011101 00111001 10101001 10101010  Original data + LRC

  16. Cyclic Redundancy Check (CRC) Based on Binary Division

  17. CRCGenerator Data plus extra zeros. The number of zeros is one less than the number or bits in the divisor. When the leftmost bit is zero, we must use 0000 instead of the original divisor

  18. CRC Checker • A CRC checker functions exactly like the generator • Data + CRC is divided by the predefined divisor • If the remainder is all 0s, accept • Otherwise discard the received data

  19. Polynomial CRC generator (the divisor) is also represented as an algebraic polynomial It is short it can be used to prove the concept mathematically

  20. Polynomial Polynomial properties : it should not be divisible by x it should be divisible by x+1 All burst errors of a length equal to the degree of polynomial are detected

  21. Standard polynomial

  22. Example of CRC Data = 1010001101 Polynomial = 110101 Calculate: 101000110100000 - 110101 = 011101110100000 Remainder = 1110 Send data frame = 10100011011110 Received Data = 10100011011110 Polynomial = 110101 Calculate: 101000110101110 - 110101 = 011101110101110 Remainder = 0

  23. Checksum • Used by the higher-layer protocols • Based on concept of redundancy • Consists of checksum generator and checksum checker

  24. Checksum • Checksum generator • The data unit is divided into k sections, each of n bits • All sections are added together using one’s complement to get the sum • The sum is complemented and becomes the checksum • The checksum is sent with the data

  25. checksum • Checksum checker • The data unit is divided into k sections, each of n bits • All sections are added together using one’s complement to get the sum • The sum is complemented • If the result is zero, the data are accepted, otherwise, they are rejected

  26. Checksum

  27. Example : Checksum Generator • (sender) 10101001 00111001 10101001 + 00111001 sum 11100010 checksum 00011101  Data sent 10101001 0011100100011101

  28. Example : Checksum Checker • Received data 10101001 0011100100011101 • sum all sections 10101001 00111001 00011101 Sum 11111111 Complement 00000000  OK

  29. Error Correction • Two methods • The sender retransmits the entire data • The receiver corrects errors using error-correction code • Error-correction code • More sophisticated than error-detection codes • Require more redundancy bits than error-detection

  30. Error Correction (cont.) • Error-correction code (cont.) • The number of bits required to correct multiple-bit or burst error is high • In most case it is inefficient to do • Most error correction is limited to one-, two-, or three-bit errors

  31. Error Correction • Self study if you are interested in it.

More Related