1 / 28

Propagation Channel Characterization and Modeling

Propagation Channel Characterization and Modeling Outdoor Power Supply Grids as Communication Channels Prof. Dr.-Ing. habil. Klaus Dostert Institute of Industrial Information Systems UNIVERSITY OF KARLSRUHE (TH). Overview. Communication over outdoor electrical power supply lines.

dale
Download Presentation

Propagation Channel Characterization and Modeling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Propagation Channel Characterization and Modeling Outdoor Power Supply Gridsas Communication Channels Prof. Dr.-Ing. habil. Klaus Dostert Institute of Industrial Information Systems UNIVERSITY OF KARLSRUHE (TH)

  2. Overview Communication over outdoor electrical power supply lines • Network structures and their basic properties • Access domain in Europe, ASIA, America • Analysis of line and cable properties • characteristic impedance • branching & matching • General aspects of channel modeling • transfer function, impulse response, channel parameterization • interference scenario • PLC channel simulation and emulation • channel adapted system development Conclusions and further work

  3. History: Carrier Frequency Transmission since 1920(on the high voltage level only) • no branching • optimal „wave guiding“ by network conditioning

  4. Low Speed (10…100 kbits/s) • - Office and home automation (intelligent appliances) • Energy information systems • Urban rail-based traffic systems Broadband Services: 1…30 MHz (1…2 Mbits/s - „Last Mile“ and „Last Meter“ high-speed internet access, voice over IP etc. High Speed Indoor Applications: 12 …  70MHz - PLC for digital entertainment systems (>100 Mbits/s) • PLC in automobiles • PLC for factory automation • PLC for advanced safety systems in the mining industry Current and Upcoming PLC Applications

  5. 3-phase supply details 400V 400V high voltage level: 110..380 kV 230V transformer station 400V medium voltage level 10...30kV 230V LV transformer stations low voltage distribution grid 3 Phases: 230V, 400V • supply cells • up to 350 households • cable length 100...400m The European Power Supply Network Structure

  6. Server Transformer Station 5 4 3 1 2 L2 L3 6 N L1 supply cable type NAYY150SE 9 8 7 cable length: max. 1 km 14 13 10 11 12 15 18 16 17 22 20 21 23 19 24 33 32 26 25 27 28 31 30 House connection cable NAYY50SE 29 Typical Topology of European Power DistributionNetworks in Residential Areas

  7. local transformer station medium voltage network cross-bar system ZL1 points of mismatch house connection forming a low impedance point - almost short circuit - Some Details of “Last Mile” and “Last Meter” Environments ZL2

  8. high voltage level: 110..380 kV single and split-phase transformer station 1st medium voltage level 10…30 kV 2ndmedium voltage distribution level 6 kV low voltage distribution grid single or split phase supply 125V, 250V 250V many LV transformers 125V 125V Power Supply Structures in Asia and America • small supply cells • few households per transformer • cable length  100m • grounding of 3rd wire • highly unsymmetrical

  9. compensation of exterior field compensation of exterior field X  The Ideal Two-Wire System

  10. 3-phase supply cable passive conductors X • “earth” in case of a three-wire supply passive conductors Symmetry in Multi-Wire Structures open wires • X

  11. Simplified Analysis of a Two-Wire System 650 characteristic impedance open wires: r=1 600 r =2mm ZL/ 550 r =2mm D r =4mm 500 r =5mm 450 r 400 350 attenuation at open wires due to Skin effect 100 150 200 250 300 350 400 0 120 l =500m cable: r=3.5 A(f)/dB 100 l =1000m -2 r =5mm 80 l =2000m r =7mm -4 60 ZL/ r =10mm 40 l =5000m -6 d=2r=5mm 20 -8 10 15 20 25 30 0 5 10 15 20 25 30 f in MHz D in mm D in mm

  12. Lossy Line Parameters (low losses) Model Access Cable Types J PEN J L3 L3 r i N L1 r L2 L3 a L1 L2 r er L1 N CharacteristicImpedance Attenuation Coefficient Characteristic Impedance Attenuation over 1km ZL/ 50 0 NAYY 150SE 10 40 House Connection NAYY50SE 20 30 30 NAYY50SE 40 Main Supply Cable 20 NAYY150SE 50 A(f) [dB] 10 60 0 70 5 20 1 2 5 10 20 1 2 10 f /MHz f /MHz RF Properties of Typical Supply Cables

  13. ZL ZL L >> ZL ZL R=ZL/3 ZL ZL/3 ZL/3 ZL ZL ZL ZL ZL ZL matched to ZL mismatch: ZL/2 The problem of Branching and Possible Solutions

  14. Transformer Station typical RF coupling devices cross-bar system decoupling L>10µH RF-shorts cable: ZLC » 25 W BALUN impedance matching House Connection MODEM L > 10µH decoupling cable: ZLC»35W BALUN power meter • Ferrite material is required for these decoupling coils, which carry high currents! • Transformer: >150A • House connection: >30A RF-shorts impedance matching MODEM Some Ideas for Signal Coupling with Enhanced SymmetryImproving EMC

  15. wireless channel as example T direct path echo path R delay:  =2-1 simplified analysis of a line with 1 unmatched branch Tbit  in practice: multiple echoes direct echo result 2 R T 1 impulse response strong inter-symbol interference:   Tbit t 1 2 Reflections Causing Echoes and Inter-Symbol Interference

  16. a a2 a ra b b2 b a2 a1 S11S12 S21S22 branch example b2 b1 a1 b1 b3 a3 Approaches Toward Deterministic Network Modeling source sink line element bq ri • high computational effort • requires detailed knowledge of network topology and device parameters • not applicable in practice

  17. s(t) t1 t2 tN impulse response k1 k2 k3 kN Fourier transform transfer function r(t) S Result low-pass behavior Attenuation Coefficient: dependent on number, lengthand matching of branches generally complex skin-effectdielectric losses The Echo-based Channel Model considering only echoes : ki=const

  18. h(t): impulse response 1 path 1 dB FT 0 path 2 -5 0.5 -10 -15 0 1 1.17 1.33 1.5 1.67 1.83 2 -20 225m  2 0 5 10 15 20 25 30 R T attenuation 200m  1 single reflection, including losses 0 0 dB dB -20 -20 path 1 path 2 -40 -40 0 5 10 15 20 25 30 0 5 10 15 20 25 30 f in MHz t in µs f in MHz f in MHz H(f): single reflection, no losses

  19. Two-Path Channel without Losses but Varying Path Weights Path 1 0.52 0.26 0.173 0.46 0.71 0.793 Path 2 0.627 0.347 0.208 0.149 0.76 0.817

  20. 0 |H(f)| dB -10 ¥ 11m -20 170m 30m » G ZL -30 -40 -50 1 0 0 5 10 15 20 25 30 -10 calculation 1 measurement 0.5 - 20 h(t) - 30 0 - 40 0.5 - 50 0 1 2 3 4 5 0 15 20 5 10 t in µs f in MHz 0 frequency in MHz 0 0.5 1 1.5 2 2.5 3 3.5 time in µs A First Realistic Example

  21. |H(f)| -20 dB 110m 15m -40 -60 -80 0 5 10 15 20 25 30 1 h(t) 0.5 0 frequency in MHz -0.5 0 0.5 1 1.5 2 2.5 3 3.5 time in µs A Second Example (more complex)

  22. Transmission Characteristics According to Length Classes 0 10 Attenuation in dB 20 30 150 m 40 200 m 50 60 300 m 70 380 m 80 10 12 14 16 18 2 4 6 8 Frequency in MHz

  23. A General Powerline Interference Model narrowband- interference periodic impulsive noise synchronous with the mains periodic impulsive noise asynchronous with the mains background noise aperiodic asynchronous impulsive noise + Channel as a Linear Filter Interference h(t) H(f) tB threat of burst errors Amplitude A tA time tIAT A, tB and tA are random variables with exponential distributions

  24. PLC Modem PLC Modem Host-PC Configuration Interface + + A A FIR Filter PGA LPF LPF D D PGA A A D D Noise Generator PGA LPF PGA A Noise Generator LPF D A FIR Filter LPF LPF D Idea of a Universal PLC-Channel Emulator

  25. FPGA channel emulation filters delay 14 from ADC D 8 signal DAC 20 14 FIR Notch FIR lowpass FIFO A control 5x7bit delay 5x5bit coeff. 32x8bit coeff. periodic, synchronous, asynchronous impulsive noise & background noise interference DAC 8 m-sequences of length 220-1 8 14 14 + Ampli- tude 14 control D 20bit shift register A 8x20bits load Ampli- tude narrow band noise 8 14 8-bit-circular memory of length 500 500 x 8bits load control 26 P_ADDR control / load 32 P_DATA Some Details Toward Emulator Realization

  26. A First Powerline Channel Emulator Prototype modified filter structure reference channel coeff. filter 1 coeff. filter 2 |H| in dB simulations, implementation |H| in dB hardware f in MHz verification measurements f in MHz

  27. FSK, GMSK not usable due to high attenuation OFDM sub-channel Why OFDM for PLC? Channel Transfer Function restricted e.g. for protection of broadcast services f fN f3 f1 f2

  28. PLC or BPL offers a variety of valuable applications • data rates exceeding many Mbits/s will enable numerous new services • Mature channel models are covering any channel of interest • successful development of a new generation of ”channel adapted” PLC systems is possible • no more pitfalls: sophisticated simulation and emulation Building advanced and user-friendly simulation and emulation environments is now an important issue • Further development and standardization of PLC or BPL goes on • ETSI, CENELEC, CISPR • EU Project OPERA (Open PLC European Research Alliance) • HomePlug Alliance (USA) • IEEE PHY/MAC Working Group Conclusions and Further Work

More Related