1 / 13

How to make LightBulb

How to make LightBulb. By: Shoeng Shoeng Class Room: G3Y Email: zhuangcheng2@gmail.com. Introduction. In this PowerPoint, you will know how to made lightbulb , who invented it and how many kind ? Watch to find out!!!!!. How to make Lightbulb ???!!.

dalila
Download Presentation

How to make LightBulb

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to make LightBulb By: ShoengShoeng Class Room: G3Y Email: zhuangcheng2@gmail.com

  2. Introduction In this PowerPoint, you will know how to made lightbulb, who invented it and how many kind? Watch to find out!!!!!

  3. How to make Lightbulb???!! I will tell you how to make lightbulb in steps. Read the next slide!!

  4. What do we need??? • Glass jar • Fitted cork stopper • 1 inch (2.54 cm) nail • 3 feet (0.9144 m) shielded copper wire • Iron wire • 6-volt battery • Wire cutter

  5. Step 1,Step2 And Step 3 Step 1: Cut the copper wire. You need 2 strands about 1.5 feet long. Step 2 :Remove 1 inchof shielding from the ends of both strands. The shielding is the plastic wish cover the wire. Step 3 : Use the nail to pierce into the cork.

  6. Step4, Step5 and step 6 Step 4 : Hold the 2 copper strands parallel to each other in the air. Step 5 : Place one end of each strand 2 inchesinside the two holes drilled into the cork. Step 6 : Bend the end of the two strands inside the cork into a hook shape. The hook of the stand should curve the same way!!!

  7. Step 7,Step 8, Step 9 Step 7 : Cut the iron wire into 2 inch (3.81 cm to 5.08 cm) strips. Make 5 strips. Step 8 : Twist the 5 iron wire strips together with your fingers.  Step 9 : Place the twisted iron wire onto the copper hooks, making sure it touches both copper strands!

  8. Step 10 and 11 and 12 Step 10 : Place the twisted iron wire onto the copper hooks, making sure it touches both copper strands. You was almost done!!! Step 11 : Take 1 strand of the copper wire not in the glass jar and wrap the end around 1 end of the battery. Repeat this for the other strand of copper wire and the other end of the battery. Step 12 : You are now finish!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  9. Picture This is what we have done!

  10. Who Invented Lightbulb? The answer is THOMAS EDISON.

  11. Kinds of Lightbulbs There were : INCANDESCENT FLUORESCENT HIGH-INTENSITY DISCHARGE LED

  12. Video Hi here are some video. Check it out!!!"How to make light bulb VDO"

  13. The End • Thank for watching my presentation!!!!!

More Related