The Step-By-Step Process Of Furniture Recycling

1. The Step-By-StepProcess Of Furniture Recycling Furniture recycling can be one of the wisest steps that one can take, but experts say that it can be fruitful, only if a step-by-step process is followed.

2. Step 1 – Repairing • In Case The Furniture Is Intact And Design Is Also Sound, This Step Can Be Skipped. • In That Case, You Should Start With Removing The Old Finish. • However, Repair Step Is Easy As It’ll Require Just A Few Tools And Equipment And Wood Glue.

3. Step 2 – Preparing The Work Area • Select A Nicely Ventilated Or Open Area Like Outdoor Deck, Garage, Etc. • Your Furniture Refinishing Area Should Be Dry And Free Of Dust. • Use Masking Tape To Secure Newspaper Or A Large Drop Cloth To The Floor To Protect It From Spills. • Remove Drawers, Doors, Mirrors And Any Hardware.

4. Step 3 Of Furniture Recycling – Removing Old Finish • Scrape The Old Varnish By Sanding Or Using Chemical Strippers. • You Can Also Use A Belt Sander For Quick Removal Of The Same. • Sanding Should Be Done Carefully Around The Curves And Decorative Areas. • Always Wear Rubber Gloves And Protective Goggles When Using Strong Chemicals. • Always Wear Gloves And Protective Goggles And A Dust Mask While Sanding. • The Work Area Should Be Well-ventilated.

5. Step 5 – Paint Application • Apply Water-based Paint By Brushing With Even Strokes In The Direction Of The Wood Grain. • The Second Coat Should Be Applied Within 1 Hour Of The First Coating Or After 24 Hours.

6. Step 4 – Apply Primer • Using A Paintbrush, Apply A Coat Of White Or Gray Water-based Primer. • Allow It To Dry For Up To 2 Hours And Then Apply The Second Coat And Let It Dry For 24 Hours Before The Final Step Of The Process Of Furniture Recycling.