1 / 55

P lant W ise Features

P lant W ise Features. Features. PlantBuilder: Rapid & Easy 3D Conceptual Modeling Rule-based equipment modeling and nozzle placement AutoRouter : Fast Quality Routing with Inline Placement Rule-based routing control, routing patterns, & Inline geometry Model and Data Management

darryl-aguirre
Download Presentation

P lant W ise Features

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PlantWiseFeatures

  2. Features • PlantBuilder: Rapid & Easy 3D Conceptual Modeling • Rule-based equipment modeling and nozzle placement • AutoRouter : Fast Quality Routing with Inline Placement • Rule-based routing control, routing patterns, & Inline geometry • Model and Data Management • Model save, split, merge, compare, report, export • PlantDrafter • Plot plans, Detached plans Integrated, Friendly, Intuitive

  3. Conceptual Modeling • Equipment • Nozzles • Pipeways • Structures • Obstacles

  4. From simple To extravagant Equipment Modeling Defined with only a few input parameters

  5. Nozzles and AutoNozzle Placed by rules

  6. From simple To complex Pipeways Defined with only a few input parameters

  7. Structures Stairways Structures (with Floors) Pedestals (without Floors) Defined with only a few input parameters

  8. Structure Pipeways Floor Penetrations Standing In-structure Pipeways Vertical Chases Hanging In-structure Pipeways Vertical Pipeways All defined with only a few input parameters

  9. AutoRouter • Fastest and Best • 1-5 seconds per pipe • Scales up to hundreds or thousands of pipelines • Features • Vicinity Routing • Free Space Routing • On-Pipeway Routing • Structure Routing • Routing through Point Clouds • Automatic Pipeline Component Placement

  10. Router Performance • 1-5 seconds per pipe

  11. Vicinity Routing Rule-based equipment specific patterns

  12. Free Space Routing Routing in priority order for lowest cost

  13. On-Pipeway Routing

  14. Eccentrically Aligned Pipeways

  15. Pipeway Level Transitions

  16. Pipeway Obstacle Avoidance and Detection

  17. Structure Routing: Chases

  18. Structure Routing: Vertical PWs

  19. Floor Penetrations

  20. Routing through Point Clouds • A collaborative project with Bitwyse

  21. Putting it All Together

  22. Automatic Component Placement • All driven from process data • Basic Components • Tees • Reducers • Spec Breaks • Control Valves • Flow Elements • User-Defined Inline components • Spec Driven (minimal data requirements)

  23. All Driven from Process Data User-Defined Inlines Branch

  24. Tees With rule-based selection of tee type

  25. Reducers Placed to minimize piping cost

  26. Spec Breaks

  27. Control Valves

  28. User-Defined Inlines

  29. Spec Driven • Simple Spreadsheet Table Interface

  30. AutoRouter Manipulation Router Menu • Pipeline Freezing • Partial • Complete • Placeable components • Slideable Components RouteManual RouteUnRouteModifySlideSupports

  31. Manipulate Segments or Elbows

  32. Pipeline Point Manipulator

  33. Frozen Line or Before Completely frozen Partially frozen

  34. Partial Freeze • Freeze a single segment • Freeze a selected range of points • Freeze non-sequential segments

  35. Placeable Components • Drag, place, and/or rotate and the pipeline follows

  36. Slideable Components

  37. User Rules • Equipment • Geometry • Physical representation • Obstacle space • Mass properties • Nozzle Placement • Vicinity Routing • Inline Components • Geometry • Attributes • Project Setup Variables • Spacing, routing planes, pipeway levels, reserved spaces, …

  38. Geometry Rule – Example I (The PACKAGED_EQUIPMENT is composed of element BASEPLATE with geometry = box x-dimension = width y-dimension = length z-dimension = inches-or-mm(6.0 150.0) local-x-origin = width / -2.0 local-y-origin = length / -2.0

  39. Geometry Rule – Example II element package geometry = box x-dimension = width - inches-or-mm(6.0 150.0) ; less 3 inches inset on both sides y-dimension = length - inches-or-mm(6.0 150.0) z-dimension = height - baseplate.z-dimension local-x-origin = package.x-dimension / -2.0 local-y-origin = package.y-dimension / -2.0 local-z-origin = baseplate.z-dimension

  40. And on to…

  41. Nozzle Rules – Example (For STORAGE_TANK nozzles WHEN nozzle.type is manway LOCATE nozzle with element = tank face = body distance = inches-or-mm(30.0 750.0) angle = away-from-pipeway ...)

  42. Vicinity Routing Rules - Example (From PACKAGED_EQUIPMENT GO nozzle-direction (10 * pipeline.diameter) AND GO up (inches-or-mm(60.0 1500.0)) )

  43. User Defined Inline Dialogs

  44. Router Settings • Many “rules” are settings in PlantWise • Routing Plane Offset • Minimum Line Spacing • Allow Tees at Corners? • Pipeway Spacing Round-off • …

  45. Model and Data Management • Report Writer and Highlighting • Interfaces • Multi-model support • Compare • Fenced Export • Integration • Proximity Checking

  46. ReportWriter A Sample Cost Report using Sample DataLine ID Class Comm. Diameter Length (ft.) pipe cost========== ====== ===== ======== ============ ============40-125 NA18 CWS 4.0 99.6 $ 4684.2840-125-1 NA18 CWS 4.0 2.9 $ 135.0040-128 NA18 CWR 6.0 103.8 $ 7323.8040-128-1 NA18 CWR 6.0 2.4 $ 169.2760-100 AF01 PL 4.0 47.8 $ 2156.8370-114 NA18 N2 1.0 52.3 $ 614.89 . . .80-130 AF01 PV 2.0 89.6 $ 2021.8290-110 NA15 STM 4.0 73.8 $ 3472.1490-111 NA15 CON 2.0 86.1 $ 2024.0790-112 NA15 STM 2.0 80.1 $ 1884.7690-113 NA15 CON 1.0 86.0 $ 1011.62 ============ ============ 1185.0 $ 57738.73

  47. Fenced Reports

  48. Highlight Set • Pipeline.diameter >= 6.0

  49. Interfaces • Pipe Route Export • .dgn/.drv compatible viewers • FrameWorks Plus(via PML) • PDS (via APL) • XMPlant

  50. Model Compare

More Related