1 / 6

Results from WG-02 Meeting, October 27th and 28th 2005, Arlington, VA

This document summarizes the outcomes of the WG-02 meeting held on October 27th and 28th, 2005 in Arlington, VA. The goal of the meeting was to collect requirements for a new 3D XA IOD SOP class. The meeting included members from WG-02, WG-15, and WG-22. The procedures discussed involved defining applications, determining common or specific modules, and collecting necessary modules and macros. A list of identified applications, modules, and macros is provided.

davidortiz
Download Presentation

Results from WG-02 Meeting, October 27th and 28th 2005, Arlington, VA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Results from WG-02 Meeting, October 27th and 28th 2005, Arlington, VA • Goal to collect requirements for a new 3D XA IOD SOP Class • Meeting was held with members from: • WG-02 • WG-15 • WG-22 • First Procedure to write up a list of applications for such a SOP Class • Second Procedureto define if Common or DX, MG or XA specific • Third Procedureto collect all necessary Modules and Macros from • enhanced CT, MR, XA • DX • non-existent modules and macros

  2. List of Applications • Archive and Query/Retrieve • Basic Review & Display of slices • Display information from source projection images • Display of anatomical information • Volume rendering and slice reformatting • Perform volumetric calculations (measurements) • Quality Control • Reapply previous processing/display states • Reapply graphics, measurements, text, trajectory, saved with the volume • Allow object interpretation • Relate to the geometry of the acquisition system • Broken down to Modules and Macros (magically during early morning hours thanks to Francisco) • ….. • around 85 Modules and Macros identified (about 80 Common!)

  3. Approach for 2006 (with higher and lower priorities): WG-11 WG-17 support from WG-02

  4. Revision 1: 28-Oct-2005

  5. Conclusion Request to WG-06 to establish an ad-hoc group 3D from X-Ray Cone Beam Projections Storage SOP Class(es) with Members from WG-02, WG-15 and WG-22 (others welcome) and to assign a supplement number for above supplement

  6. You are here

More Related